Material for #50-040004 Micro-Tec titanium AFM/SPM cantilever tweezers
Order #50-040004 Micro-Tec AFM / SPM titanium cantilever tweezers
General remarks:
- Titanium Grade 1 (non-alloy Titanium)
- Fully non-magnetisable
- Engineering material which is strong, light-weight and a high melting point
- Good cold form ability, high ductility
- Bio compatible material; cell integrity is maintained, no inflammatory response
- Good corrosion resistance at room temperature to air, marine and industrial environments
- Typical use for magnetic cantilevers or in magnetic fields
General composition of Titanium grade 1
| Element | Wt. % |
Ti |
99.5 |
C |
≤0.1 |
O |
≤0.18 |
N |
≤0.03 |
Fe |
≤0.2 |
H |
≤0.015 |
Properties of Titanium Grade 1
| Mechanical Properties | |
State |
Annealed |
Density |
4.51 g/cm3 |
Hardness, Vickers |
122 HV |
Tensile strength, ultimate |
330 MPa |
Tensile strength, yield |
240 MPa |
Elongation until break |
30% |
Modulus of Elasticity |
100 GPa |
Thermal Properties |
|
Coefficient of linear thermal expansion |
9.2 x 10-6 /°C (0-315°C) |
Specific heat capacity |
0.52 J/(g.K) |
Thermal conductivity |
16W/(m.K) |
Continuous use (service) temperature |
350°C |
Maximum service temperature (short) |
860°C |
Electrical Properties |
|
Resistivity |
0.45 x 10-4 Ohm.cm |
TSB 50-040004 Material for Micro-Tec titanium AFM/SPM cantilever tweezers Revision 1
