Micro-Tec diaphragm vacuum pump
EM-Tec Save-Storr inert gas storage container
EM-Storr vacuum sample storage containers
Micro-Tec diaphragm vacuum pump
Oil-less vacuum pump for vacuum desiccators and degassing applications
Introduction
The Micro-Tec MP850S diaphragm pump is ideally suited to pump vacuum container or desiccators in a laboratory environment. The single stage Micro-Tec MP850S can pump a vacuum down to 150mbar with a pumping speed of 1.8 m3/hr. This oil-less diaphragm pump provides a clean vacuum and emits no oil vapours.
An additional feature is the compressor function with a pressure up to 2.1 Bar. It is designed for continuous use with a moderate noise level. The soft rubber feet provide further sound insulation. It features two pressure gauges, hose barbs and valves. Additional applications are degassing of epoxy resins or silicones, drying and filtration.
Features of the Micro-Tec oil-less diaphragm vacuum pump:
- Single stage dry diaphragm vacuum pump
- Integrated vacuum and pressure gauge
- Stable pressure which can be adjusted by a valve
- Space saving design with anti-vibration feet
- 24hrs continuous duty cycle
- Portable
- Clean vacuum, no oil vapours
Specifications of the Micro-Tec MP850S diaphragm vacuum pump:
Product |
Micro-Tec MP850S |
Max. Vacuum |
150 mbar (-850mbar) |
Pumping speed |
30L/min |
Max. Pressure |
30 psi / 2.1 bar |
Vacuum gauge |
MPa / inches Hg |
Pressure gauge |
Bar / Psi |
Stages |
1 |
Noise level at vacuum |
<50dB |
Valves (2x) |
vacuum and at pressure |
Hose connection (2x) |
Ø 10 mm |
Service temperature |
5 – 40 °C |
Power requirements |
180 W @ 230V/50Hz |
Dimensions (L x W x H) |
250 x 135 x 240 mm |
Weight |
8 kg |
Ordering information for the Micro-Tec MP850S diaphragm vacuum pump
|
