EM-Tec SEM stub based compact sample holders

•                                                   
• pin stub based  |
  • EM-Tec PS4 mini pin stub vise clamp 0-4mm, Ø12.7x7.2mm, pin
  • EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7x7.2mm, pin
  • EM-Tec PS44 quad vise stub holder for 4 samples from 0-4mm, pin
  • EM-Tec F12 compact FIB grid holder for up to 2 FIB grids, pin
  • EM-Tec PS7 mini pin stub dual slot vise clamp, 2x1mm, Ø15x6mm, pin
  • EM-Tec PS12 pin stub vise clamp 0-12mm, Ø25x7.2mm, pin
  • EM-Tec PS5 pin stub round clamp up to Ø3.5mm, Ø12.7x7.2mm, pin
  • EM-Tec PS8 pin stub round clamp up to Ø6mm, Ø12.7x7.2mm, pin
  • EM-Tec PS15 Pin stub swivel mount, Ø15x15mm, pin
  • EM-Tec PS16 pin stub round clamp up to Ø16mm, Ø25x7.2mm, pin
  • EM-Tec PV5 mini vise sample clamp, pin
  • EM-Tec P36 fixed 36°pre-tilt holder for Zeiss FIB systems, Ø12.7x17mm, pin
  • EM-Tec P38 fixed 38°pre-tilt holder for TFS / FEI FIB systems, Ø12.7x17mm, pin
  • EM-Tec PS2 needle / tube sample holder for up to 2mm daimeter, aluminium, pin
  • EM-Tec P45 fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, pin
  • EM-Tec P45M fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, pin
  • EM-Tec PH10 pin stub extender, 10mm extra height, Ø12.7x22.7mm, aluminium
  • EM-Tec P70Z EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, pin
  • EM-Tec P70M EBSD 70° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x20mm, pin
  • EM-Tec PS11 mini pin stub grid holder for 1 x TEM grid, Ø12.7x3.2mm, pin
  • EM-Tec PS14 mini pin stub grid holder for 4 x TEM grids, Ø12.7x3.2mm, pin
  • EM-Tec PS3 mini pin stub SampleClamp 0-2mm, Ø12.7mm, pin
  • EM-Tec PS9 mini split mount vise 0 - 8mm, pin
  • EM-Tec PS23 pin stub dual slot vise clamp, 2x2.5mm on Ø25x7.2mm pin stub
  • EM-Tec PS27 pin stub dual slot vise clamp, 2x7mm on Ø25x7.2mm pin stub
• JEOL cylinder stub based  |
  • EM-Tec HS2 mini M4 cylinder stub tube/needle clamp Ø2mm , Ø15x10mm, M4
  • EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, Ø15x10mm, M4
  • EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, Ø25x10mm, M4
  • EM-Tec HV5 mini vise sample clamp, M4
  • EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, Ø15x6mm, M4
  • EM-Tec HS10 M4 cylinder stub round clamp up to Ø10mm, Ø15x10mm, M4
  • EM-Tec HS12 M4 cylinder stub round clamp up to Ø12.2mm, Ø15x10mm, M4
  • EM-Tec HS16 M4 cylinder stub round clamp up to Ø16mm, Ø25x10mm, M4
  • EM-Tec H3 multi stub holder for 3 x Ø15mm Hitachi stubs, Ø25x6mm, M4
  • EM-Tec H45P fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, M4
  • EM-Tec H45 fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, M4
  • EM-Tec H70P EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, M4
  • EM-Tec H10 Hitachi M4 stub extender 10mm fixed, Ø15x10mm, M4
  • EM-Tec H70 EBSD 70° / 20° pre-tilt holder for Hitachi M4 stubs/holders, 12.5x12.5x20mm, M4
  • EM-Tec HS3 mini M4 cylinder stub SampleClamp 0-2mm , Ø15x10mm, M4
  • EM-Tec HS9 mini split mount vise 0 - 8mm, M4
• Hitachi M4 stub based 
  • EM-Tec JS2 mini cylinder stub tube/needle clamp Ø2mm, JEOL Ø12.2x10mm
  • EM-Tec JS4 mini cylinder stub vise clamp 0-4mm, JEOL Ø12.2x10mm
  • EM-Tec JS12 cylinder stub vise clamp 0-12mm, JEOL Ø25x10mm
  • EM-Tec JV5 mini vise sample clamp, JEOL Ø12.2mm stub base
  • EM-Tec JS14 cylinder stub round clamp for up to Ø16mm, JEOL Ø25x10mm
  • EM-Tec JS3 mini cylinder stub SampleClamp 0-2mm, JEOL Ø12.2x10mm

                                     a few  Examples

The EM-Tec stub based SEM sample holders are all small SEM sample holders based on (modified) SEM sample stubs. They have the same footprint as the original SEM sample stubs and are directly compatible with the SEM stage or SEM sample stub holder.  These affordable sample holders increase efficiency and reduce sample preparation time. Using sample holders reduces the use of conductive adhesives which can be a source of contamination. The EM-Tec stub based small sample holders formats are:

• Standard pin stub based compact sample holders
• JEOL cylinder stub based sample holders
• Hitachi M4 stub based sample holders

The pin stub based sample holders comprise the largest selection; they can be easily used on other SEM platforms by using the cost efficient EM-Tec SEM stub adapters. All EM-Tec compact SEM stub based SEM sample holders are precision machined from vacuum grade aluminium unless otherwise noted. Provided with set screws and allen keys.

There is a wide choice of the compact EM-Tec pin stub based sample holders. Since they are small and using the standard pin stub format, they will fit in virtually any SEM compatible with standard pin stubs. They are based on standard pin stubs or made from modified pin stubs with a pin size of Ø3.15mm and a pin length of 9.5mm. Ideal for table top SEMs such as the Phenom but just as useful on laboratory grade SEMs and FESEMs. Using a sample holders is quicker, cleaner and provides more stability than conductive tapes or glues.
Capacity, stub size and sample holding method of the EM-Tec pin stub based compact sample holders

The compact EM-Tec cylinder stub based sample holders for JEOL SEMs are made from either the Ø12.2x10 or Ø25x10mm JEOL cylinder stubs. They are directly compatible with the JEOL stub holders on the SEM stage. Perfect for the JEOL Neoscope 5000/6000 table top SEMs, but equally useful on laboratory grade SEMs and FESEMs.
Capacity, stub size and sample holding methode of the EM-Tec JEOL stub based compact sample holders

The compact EM-Tec cylinder stub based for Hitachi SEMs are based on either the Ø15mm or the Ø25mm Hitachi M4 sample stubs. They can be used directly on the Hitachi SEM stage adapters and the EM-Tec SEM stage adapters with M4 thread. They are perfect for the Hitachi TM1000, TM3000, TM3030 table top SEMs, but will be very useful on all other Hitachi SEMs as well.
Capacity, stub size and sample holding methode of the EM-Tec Hitachi M4 stub based compact sample holders

Ordering Information for EM-Tec pin stub based compact sample holders for SEMs using pin stubs: TFS, FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica and CamScan SEMs

EM-Tec PS4 mini pin stub vise clamp 0-4mm, Ø12.7x7.2mm, pin EM-Tec PS4 mini pin stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross sections of thin samples. Holder size w/o pin is Ø12.7x7.2mm. Product # Unit Price* Add to Quote / Order 10-002240 each €7,50 Qty: EM-Tec PS4 mini pin stub vise clamp 0-4mm, Ø12.7x7.2mm, pin EM-Tec PS4 mini pin stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross sections of thin samples. Holder size w/o pin is Ø12.7x7.2mm. Product # Unit Price* Add to Quote / Order 10-002240-10 pkg/10 €71,25 Qty: EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7x7.2mm, pin EM-Tec PS6 mini pin stub split vise clamp for sample thickness from 0-6mm. The sample is clamped between the two min vise clamps. The split vise jaws are closed by an allen screw. Closed split vise diameter is 12.7mm; when opened it is 19x12.7mm. Product # Unit Price* Add to Quote / Order 10-002218 each €24,50 Qty: EM-Tec PS44 quad vise stub holder for 4 samples from 0-4mm, pin The samples are held vertically with 4 small set screws. Most effective way to study cross sections or thin samples. Holder size w/o pin is Ø25.4 x 7.2mm. Standard pin. Product # Unit Price* Add to Quote / Order 10-002244 each €29,50 Qty: EM-Tec F12 compact FIB grid holder for up to 2 FIB grids, pin EM-Tec F12 is a basic yet practical FIB grid holder with pin for 2 FIB grids. Based on the standard Ø12.7mm pin stub it is compact and useful for storing valuable FIB samples. The 10mm wide vise clamp includes a ledge for easy positioning of the FIB grids Product # Unit Price* Add to Quote / Order 12-000270 each €29,50 Qty: EM-Tec PS7 mini pin stub dual slot vise clamp, 2x1mm, Ø15x6mm, pin EM-Tec PS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø15x6mm. Product # Unit Price* Add to Quote / Order 10-002242 each €19,50 Qty: EM-Tec PS12 pin stub vise clamp 0-12mm, Ø25x7.2mm, pin EM-Tec PS12 pin stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw. Most effective way to study cross section of thin samples. Holder size w/o pin is Ø25x6mm. Product # Unit Price* Add to Quote / Order 12-000112 each €24,50 Qty: EM-Tec PS5 pin stub round clamp up to Ø3.5mm, Ø12.7x7.2mm, pin EM-Tec PS5 mini pin stub to clamp round shaped samples up to Ø3.5mm. Samples are held by a set screw. Pin stub top diameter is 12.7mm. Product # Unit Price* Add to Quote / Order 10-002213 each €18,50 Qty: EM-Tec PS8 pin stub round clamp up to Ø6mm, Ø12.7x7.2mm, pin EM-Tec PS8 mini pin stub to clamp round shaped samples up to Ø6.0mm. Samples are held by a set screw. Pin stub top diameter is 12.7mm. Product # Unit Price* Add to Quote / Order 10-002216 each €18,50 Qty: EM-Tec PS15 Pin stub swivel mount, Ø15x15mm, pin EM-Tec PS15 swivel pin stub mount. The head of the mount is attached to the pin via a swivel hinge which allows for 90 degrees tilting each way. Excellent mount for SEMs without tilting facilities or when random tilt angled are needed. When the desired tilt angle is set, the top is secured with a socket cap screw. Top diameter is 15mm and height above pin is 15mm. Product # Unit Price* Add to Quote / Order 12-000211 each €38,50 Qty: EM-Tec PS16 pin stub round clamp up to Ø16mm, Ø25x7.2mm, pin EM-Tec PS16 pin stub to clamp round shaped samples up to Ø16.0mm. Samples are held by a set screw. Pin stub top diameter is 25mm. Product # Unit Price* Add to Quote / Order 12-000116 each €24,50 Qty: EM-Tec PV5 mini vise sample clamp, pin EM-Tec PV5 mini sample vise clamp for sample thickness from 0-5mm. The sample is held vertically between the vise jaws. The vise jaws are tightened by a brass thumb screw. This sample holder is fully non-magnetic (aluminium and brass). Holder size is Ø12.2x17mm without pin. Product # Unit Price* Add to Quote / Order 12-002209 each €39,50 Qty: EM-Tec P36 fixed 36°pre-tilt holder for Zeiss FIB systems, Ø12.7x17mm, pin EM-Tec P36 fixed angle 36° tilt holder for Zeiss pin stubs. Used to pre-tilt samples 36° for Zeiss CrossBeam FIB systems. Size without pin is Ø 12.7 x 17 mm. Product # Unit Price* Add to Quote / Order 10-002236 each €39,50 Qty: EM-Tec P38 fixed 38°pre-tilt holder for TFS / FEI FIB systems, Ø12.7x17mm, pin EM-Tec P38 fixed 38° tilt holder for TFS / FEI pin stubs. Used to pre-tilt samples 38° for TFS / FEI Dual Beam FIB systems. Size without pin is Ø 12.7 x 17 mm. Product # Unit Price* Add to Quote / Order 10-002238 each €39,50 Qty: EM-Tec PS2 needle / tube sample holder for up to 2mm daimeter, aluminium, pin EM-Tec PS2 mini pin stub tube/needle clamp. Capacity is up to Ø2mm diameter, the needle is secured with a small set screw. This holder is ideal for probes, needles, wire and thin tubes. Holder size is Ø6x4mm. Product # Unit Price* Add to Quote / Order 12-000117 each €22,50 Qty: EM-Tec P45 fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, pin EM-Tec P45 fixed 45° tilt holder for standard pin stubs. Image sample surfaces or cross sections directly under 45°. Particularly useful for table top SEMs without tilt facilities. Size w.o. pin is Ø12.7x17mm. Product # Unit Price* Add to Quote / Order 10-002245 each €39,50 Qty: EM-Tec P45M fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, pin EM-Tec P45M fixed 45° tilt holder for Hitachi M4 cylinder stubs. Enables imaging sample surfaces or cross sections directly under 45° w/o having to tilt the SEM stage. Very useful for tabletop SEMs without tilt facility. Dimensions without pin are Ø 12,7 x 17 mm. Product # Unit Price* Add to Quote / Order 10-002246 each €39,50 Qty: EM-Tec PH10 pin stub extender, 10mm extra height, Ø12.7x22.7mm, aluminium EM-Tec PH10 pin stub extender, 10mm extra height, Ø12.7x22.7mm, aluminium. Use when extra height is needed to bring the sample closer to the pole piece of the SEM, without using the Z-axis of the stage. Includes Allen key. Product # Unit Price* Add to Quote / Order 11-000210 each €24,50 Qty: EM-Tec P70Z EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, pin Product # Unit Price* Add to Quote / Order 10-002270 each €44,50 Qty: EM-Tec P70M EBSD 70° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x20mm, pin EM-Tec P70M fixed 70° EBSD tilt holder for Hitachi M4 stubs and sample holders with M4 threaded hole. Tilts the sample surface directly at the correct angle (70°) for EBSD analysis applications. Size without pin is 12.7 x 12.7 x 20 mm. Product # Unit Price* Add to Quote / Order 10-002274 each €44,50 Qty: EM-Tec PS11 mini pin stub grid holder for 1 x TEM grid, Ø12.7x3.2mm, pin EM-Tec PS11 mini pin stub holder for a single TEM or FIB grid. TEM grid rim rests on a ledge; in the middle of the cavity there is dimple; samples on the grid are free standing and not touched by the holder. Groove is provided for easy loading/unloading of the TEM grid with fine tweezers. The TEM grid is not clamped. This holder is used for quickly checking a TEM grid in the SEM or as a grid holder for a carbon evaporator. Pin stub top diameter is 12.7mm. Product # Unit Price* Add to Quote / Order 10-002211 each €19,50 Qty: EM-Tec PS14 mini pin stub grid holder for 4 x TEM grids, Ø12.7x3.2mm, pin EM-Tec PS14 mini pin stub holder for four TEM or FIB grids. TEM grid rim rests on a ledge; in the middle of each cavity there is dimple to provide a non-touching area for the mesh of the grid. Grooves are provided for easy loading/unloading of the TEM grids with fine tweezers. The TEM grids are not clamped. This holder is used for quickly checking TEM grids in the SEM or as a grid holder for a carbon evaporator. Pin stub top diameter is 12.7mm. Product # Unit Price* Add to Quote / Order 10-002214 each €24,50 Qty: EM-Tec PS3 mini pin stub SampleClamp 0-2mm, Ø12.7mm, pin EM-Tec PS3 mini pin stub SampleClamp to clamp thin samples, foils, Si wafer pieces, etc. directly on the small stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Pin stub diameter is 12.7mm. Product # Unit Price* Add to Quote / Order 10-002212 each €18,50 Qty: EM-Tec PS9 mini split mount vise 0 - 8mm, pin EM-Tec PS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions without pin are Ø15x10mm; when opened 23x15x10mm. Product # Unit Price* Add to Quote / Order 12-000230 each €26,50 Qty: EM-Tec PS23 pin stub dual slot vise clamp, 2x2.5mm on Ø25x7.2mm pin stub EM-Tec PS23 pin stub dual slot vise with two slots of 2.5 mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø25x7.2mm. Product # Unit Price* Add to Quote / Order 10-002223 each €24,50 Qty: EM-Tec PS27 pin stub dual slot vise clamp, 2x7mm on Ø25x7.2mm pin stub EM-Tec PS27 pin stub dual slot vise with two slots of 7 mm wide. Ideal for holding thin wafer pieces samples for cross section imaging or other thin samples. Samples are clamped by set screws. Holder size w/o pin is Ø25x7.2mm. Product # Unit Price* Add to Quote / Order 10-002227 each €24,50 Qty: Ordering Information for EM-Tec Hitachi M4 stub based compact sample holders for Hitachi SEMs and the versatile EM-Tec SEM stage adapters *Prices without VAT, but within the EU, we have to check for valid VAT-ID. Select currency € $    EM-Tec HS2 mini M4 cylinder stub tube/needle clamp Ø2mm , Ø15x10mm, M4 EM-Tec HS2 mini M4 cylinder tub/needle clamp. Capacity is Ø2mm maximum, the needle is secured with a small set screw. This holder is ideal for probes, needles, wire and thin tubes. The perfect holder for the Cameca Atom Probe Microscope needle shaped samples. Holder size is Ø15x10mmxM4. Product # Unit Price* Add to Quote / Order 12-000331 each €18,50 Qty: EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, Ø15x10mm, M4 EM-Tec HS6 mini M4 cylinder stub vise clamp for sample thickness from 0-6mm. The sample is held vertically with a small set screw. Simple and cost-effective way to clamp cross sections of thin samples. Holder stub size is Ø15x10mmxM4. Product # Unit Price* Add to Quote / Order 12-000306 each €18,50 Qty: EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, Ø25x10mm, M4 EM-Tec HS15 M4 cylinder stub vise clamp for sample thickness from 0-16mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp base on the stub size of Ø25x10mmxM4. Product # Unit Price* Add to Quote / Order 12-000315 each €24,50 Qty: EM-Tec HV5 mini vise sample clamp, M4 EM-Tec HV5 mini sample vise clamp for sample thickness from 0-5mm. The sample is held vertically between the vise jaws. The vise jaws are tightened by a brass thumb screw. This sample holder is fully non-magnetic (aluminium and brass). Holder size is Ø12.2x17mmxM4. Product # Unit Price* Add to Quote / Order 12-003209 each €38,50 Qty: EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, Ø15x6mm, M4 EM-Tec HS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer like samples for cross section imaging. Sample are clamped by set screws. Holder size is Ø15x6mm, M4 threaded hole. Product # Unit Price* Add to Quote / Order 12-000328 each €19,50 Qty: EM-Tec HS10 M4 cylinder stub round clamp up to Ø10mm, Ø15x10mm, M4 Product # Unit Price* Add to Quote / Order 12-000307 each €24,50 Qty: EM-Tec HS12 M4 cylinder stub round clamp up to Ø12.2mm, Ø15x10mm, M4 Product # Unit Price* Add to Quote / Order 12-000304 each €24,50 Qty: EM-Tec HS16 M4 cylinder stub round clamp up to Ø16mm, Ø25x10mm, M4 EM-Tec HS16 M4 cylinder stub to clamp round shaped samples up to Ø16mm in diameter. Samples are held by a set screw in the middle of a 25mm Hitachi stub. Holder stub size is Ø25x10mmxM4. Product # Unit Price* Add to Quote / Order 12-000324 each €24,50 Qty: EM-Tec H3 multi stub holder for 3 x Ø15mm Hitachi stubs, Ø25x6mm, M4 EM-Tec H3 multi stub adapter for 3 x Ø15mm Hitachi stubs. Compact and simple multi stub adapter based on the Hitachi Ø25x6mmxM4 stub. Product # Unit Price* Add to Quote / Order 12-000356 each €28,50 Qty: EM-Tec H45P fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, M4 EM-Tec H45P fixed 45° tilt holder for standard and Zeiss pin stubs. Image sample surfaces or cross sections directly under 45° w/o having to use the tilt on the SEM stage. Particularly useful for table top SEMs without tilt facilities or to extend tilt angles for limited tilt stages. Overall size is Ø12.7x17mmxM4. Product # Unit Price* Add to Quote / Order 12-000345 each €39,50 Qty: EM-Tec H45 fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, M4 EM-Tec H45 fixed 45° tilt holder Hitachi M4 cylinder stubs. Image sample surfaces or cross sections directly under 45° w/o having to tilt the SEM stage. Particularly useful for table top SEMs without tilt facilities or to extend tilt angles for limited tilt stages. Overall size is Ø12.7x17mmxM4. Product # Unit Price* Add to Quote / Order 12-000341 each €39,50 Qty: EM-Tec H70P EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, M4 EM-Tec H70P fixed 70° EBSD tilt holder for pin stubs and pin stub type sample holders. Tilts the sample surface directly at the correct angle (70°) for EBSD analysis applications. Suitable for surfaces and cross sections. Overall size is 12.7 x 12.7 x 20 mm x M4. Product # Unit Price* Add to Quote / Order 12-000370 each €44,50 Qty: EM-Tec H10 Hitachi M4 stub extender 10mm fixed, Ø15x10mm, M4 EM-tec H10 Hitachi M4 stub extender with a fixed height of 10mm. Use where extra height is needed to get closer to the pole piece of the SEM or to change height quickly without using the Z-axis of the SEM stage when multi pin holders are used. Machined from vacuum grade aluminium with stainless steel screw. Overall size is Ø15x14mm. Product # Unit Price* Add to Quote / Order 11-000309 each €19,50 Qty: EM-Tec H70 EBSD 70° / 20° pre-tilt holder for Hitachi M4 stubs/holders, 12.5x12.5x20mm, M4 EM-Tec H70 fixed 70° EBSD tilt holder for Hitachi M4 stubs and sample holders with M4 threaded hole. Tilts the sample surface directly at the correct angle (70°) for EBSD analysis applications. Overall size is 12.7 x 12.7 x 20 mm x M4. Product # Unit Price* Add to Quote / Order 12-000371 each €44,50 Qty: EM-Tec HS3 mini M4 cylinder stub SampleClamp 0-2mm , Ø15x10mm, M4 EM-Tec HS3 mini M4 cylinder stub SampleClamp to clamp thin samples, foils, Si wafer pieces etc. directly on the stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Holder stub size is Ø15x10mmxM4. Product # Unit Price* Add to Quote / Order 12-000311 each €18,50 Qty: EM-Tec HS9 mini split mount vise 0 - 8mm, M4 EM-Tec HS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two Allen screws. Closed mini split mount vise dimensions are Ø15x10mm; when opened 24x15x10mm. M4 threaded hole in the base. Product # Unit Price* Add to Quote / Order 12-000330 each €25,50 Qty: Ordering information for EM-Tec JEOL stub based compact sample holders for JEOL SEMs *Prices without VAT, but within the EU, we have to check for valid VAT-ID. Select currency € $    EM-Tec JS2 mini cylinder stub tube/needle clamp Ø2mm, JEOL Ø12.2x10mm Product # Unit Price* Add to Quote / Order 12-000502 each €18,50 Qty: EM-Tec JS4 mini cylinder stub vise clamp 0-4mm, JEOL Ø12.2x10mm EM-Tec JS4 mini cylinder stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross section of thin samples. Holder stub size is Ø12.2x10mm. Product # Unit Price* Add to Quote / Order 12-000504 each €18,50 Qty: EM-Tec JS12 cylinder stub vise clamp 0-12mm, JEOL Ø25x10mm EM-Tec JS12 cylinder stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp based on the stub size of Ø25x10mm. Product # Unit Price* Add to Quote / Order 12-000512 each €24,50 Qty: EM-Tec JV5 mini vise sample clamp, JEOL Ø12.2mm stub base EM-Tec JV5 mini sample vise clamp for sample thickness from 0-5mm. The sample is held vertically between the vise jaws. The vise jaws are tightened by a brass thumb screw. This sample holder is fully non-magnetic (aluminium and brass). Compatible with holders for the Ø12.2x10mm JEOL stub with a height of 17mm above the stub. Product # Unit Price* Add to Quote / Order 12-000509 each €39,50 Qty: EM-Tec JS14 cylinder stub round clamp for up to Ø16mm, JEOL Ø25x10mm Product # Unit Price* Add to Quote / Order 12-000514 each €24,50 Qty: EM-Tec JS3 mini cylinder stub SampleClamp 0-2mm, JEOL Ø12.2x10mm EM-Tec JS3 mini cylinder stub SampleClamp to clamp thin samples, foils, Si wafer pieces etc. directly on the small stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Holder stub size is Ø 12.2 x 10 mm. Product # Unit Price* Add to Quote / Order 12-000503 each €18,50 Qty: © Micro to Nano 2026 Website: www.microtonano.com Micro to Nano BV Tappersweg 91 2031 ET Haarlem Netherlands Contact - English, German and Dutch spoken Tel:+31 (0)85 2013155 Info: info@microtonano.com Administration: accounting@microtonano.com KvK-nr: 90172744 Btw-nr (Tax ID): NL865230900B01 Bankaccount: 0495516724 IBAN: NL32ABNA0495516724 BIC (SWIFT): ABNANL2AMEL close SEM Supplies TEM Supplies Calibration Sample Preparation AFM / SPM   Product Menu with Images   SEM Sample Stubs Overview stubs Standard pin stubs TFS / FEI pin stubs Tescan SEM pin stubs Hitachi M4 SEM stubs JEOL SEM stubs Zeiss SEM pin stubs Carbon sample stubs Hitachi in lens stubs Gatan 3View stubs TFS / FEI VolumeScope stubs ISI-ABT-Topcon stubs Silicon finder grid Stub gripper tweezers   Carbon Tabs High purity 6mm High purity 9mm High purity 12mm High purity 25mm Super smooth 12mm Super smooth 24mm   Sample Stub Adapters Overview stub adapters Pin stub adapters JEOL stub adapters Hitachi M4 stub adapters SEC stub adapters Metal slide adapter Universal stub adapter set   SEM Stage Adapters Overview SEM stage adapters JEOL stage adapters JEOL Neoscope adapters Hitachi stage adapters Hitachi TM stage adapters Zeiss/LEO stage adapter TFS/FEI/Philips stage adapters TESCAN stage adapter Pemtron stage adapter Pin stub adapters to M4 thread EM-Tec versatile stage adapters   SEM Sample Holders Overview Sample holders Angled and tilt holders Bulk SEM sample holders Large Bulk sample holders Centering vise holder Compact and universal vises C-Square multi pin stub holders EBSD sample holders EBSD-3D holder FEI/Thermo FIB grid holders Filter disc holders Four-sided clamping holders Geological slide holders Gold series sample holders Gripping stub & stub vises Low Profile S-clip holders Metallographic mount holders Low Profile mount holders Multiple metallographic mount holders Compact metallographic mount holders Multiple Hitachi stub holders Multiple JEOL stub holders Multiple pin stub holders Multi XL holder large Replacement screws/parts Sample clamp holders S-clip sample holders Small sample holders Small vise holders Spring-loaded vise holders Soft jaw lining kit STEM imaging holder Swivel tilt sample holders t-EBSD sample holders TEM grid holders Top reference Holders Universal sample holder kit Vacuum Transfer Shuttle Versatile vise clamp holders Versa-Plate adaptable holder Wafer holders °360°/90°off-set holder   SEM Preparation Stands Pin stub preparation pods SEM prep. stands JEOL stub Prep. stands Hitachi stub prep. Sstands   Filaments / Cathodes Overview filaments Tungsten SEM filaments Kimball LaB6 cathodes Denka LaB6 cathodes YPS Schottky TFE sources   Silicon Finder Grid Silicon finder grid   Gatan 3View Pins Gatan 3View Pins 3View Pins tweezers 3View Pins Storage   FEI Volumescope Pins FEI Volumescope pins FEI Volumescope box   SEM Stub Storage Boxes Pin stub storage boxes Hitachi stub storage boxes JEOL stub storage boxes Overview storage   Phenom Supplies Phenom stubs & holders Phenom basic supplies   JEOL NeoScope Supplies JEOL NeoScope stubs & holders JEOL NeoScope basic supplies   Hitachi TM Series Supplies Hitachi TM series stubs & holders Hitachi TM series basic supplies   Semplor NANOS Supplies Semplor NANOS stubs & holder Semplor NANOS basic supplies   Field & Lab Sampler Kits With 12.7mm pin stubs With 25.4mm pin stubs   FlowView liquid sample Kit FlowView liquid sample Kit Instruments   Acoustic Enclosures Acoustic enclosures Overview EM instruments   Cressington SEM coaters Overview Cressington instruments SEM 108 Sputter Coaters SEM 108Carbon Coaters 208HRD turbo sputter coater 208C turbo carbon coater Vacuum Pump Systems R-T and R-P-T stages MTM thickness monitor Cressington Consumables 108 sputter system for tabletop SEM   TEM Sample Prep Overview EM instruments Microsaw Micropol Microheat X-TEM tools TempStick mounting wax Sample leveling press   Diaphragm Pump Single stage pump Dual stage pump   Rotary vacuum Pump VRI-Series Rotary pump. KF/NW oil mist filters Anti-vibration pads   Precision diamond saw   Precision diamond saw Wafering blades Saw sample holders   TEM Grids Overview TEM supplies EM-Tec TEM grids Gilder TEM grids Value-Tec TEM grids Lift-out FIB grids Anti-static instrument   TEM Support Films Overview support films Formvar films Formvar carbon films Carbon only films Holey carbon films Lacey carbon films Overview TEM supplies Ultra-thin carbon films Finder grid films   Silicon Nitride Films 10nm silicon nitride films 20nm silicon nitride films 30nm silicon nitride films 50nm silicon nitride films 100nm silicon nitride films 200nm silicon nitride films Overview support films   K-Kit Wet Cell Holder K-Kit liquid cells K-kit accessories   Graphene Films Graphene support films   TEM Grid Boxes EM-Tec grid boxes Gilder grid boxes Cryo grid boxes Lift-out grids Box   Cryo Grid Boxes Premium cryo grid box EM Tec cryo grid box Pin type cryo grid box Aluminium cryo grid boxes AutoGrid cryo grid box Cryo box tweezers Pin type box gripper   TEM Sample Staining UranyLess staining Uranyless in 30% Ethanol Uranyless Acetone Stain 77 for negative staining Lead citrate contrast   3mm Embedding Tubes TEM 3mm embedding tubes   Filaments/Cathodes Overview filaments Tungsten TEM Filaments Kimball LaB6 Cathodes Denka LaB6 cathodes YPS Schottky TFE sources   Eyelash Manipulators Eyelash manipulators Cryo Supplies   Cryo Grid Boxes Premium cryo grid box EM Tec cryo grid box Pin type cryo grid box Aluminium cryo grid boxes AutoGrid cryo grid box Cryo box tweezers Pin type box gripper   Other Cryo Supplies Cryo pin for U-M Cryo grid box tweezers Cryo tissue embedding compound PTFE Beakers Cryo Protection Gloves FIB Supplies   FIB Lift-out Grids Cu FIB grids Mo FIB grids Smooth Mo FIB grids FIB grid Storage Boxes   FIB Low Profile Stubs FIB low profile stubs   FIB Grid Holders FIB grid holders FIB grid & sample holders   FIB Pre-tilt Holders FIB pre-tilt holders   FIB Pre-tilt stubs TFS/FEI stubs Zeiss stubs Tescan stubs   FIB Grid Boxes FIB grid boxes   SEM / FIB Magn. Calib. Overview calibration Magn. Cal. MCS-1 Mag. Cal. MCS-0.1 Magn. Cal. MCS-1 X-Y Mag. Cal. MCS-0.1 X-Y Checkerboard cal. pattern M-1 grid pattern 1um M-10 grid pattern 10um LAMC-15 low mag. LAMC-15 large area MTC-5 multiple targets   SEM Res. Test Spec. Gold resolution test Tin resolution test   EDS / WDS Calibration CSX for EDS/WDS/BSD RSX for EDS/WDS/BSD/CL EM-Tec EDX Checker EM-Tec faraday cup   TEM Calibration Overview TEM calibration MAG*I*CAL calibration Resolution standards Test standards   AFM / SPM Calibration AFM tipcheck AFM calibration standard AFM test gratings KPFM & EFM test sample   LM Magn. Calibration Micro-Tec Individual graticules MTC-5 multiple targets Stage micrometers Glass calibration slides Vacuum Supplies   Vacuum Gauges Quick-check gauges   KF/NW Vacuum Parts KF/NW centering rings KF/NW clamps KF/NW blanking plates KF/NW reducer KF/NW O-rings KF/NW hose adapters KF/NW 90 degree elbows KF/NW equal T connections KF/NW equal cross connections KF/NW through tubes KF/NW manual venting valves KF/NW metal vacuum bellows KF/NW ball valves KF/NW to BSPT adapters KF/NW to NPT adapters KF/NW to Metric thread adapters   KF/NW Vacuum Hoses KF/NW PVC vacuum hoses KF/NW metal vacuum bellows KF/NW ball valves Silicone vacuum hose PVC Vacuum Hose KF/NW Hose adapters Hose clamps   ISO Vacuum flange parts ISO Centering seals ISO-K claw clamps   Vacuum Transfer Shuttle Vacuum Transfer Shuttle   Vacuum Oil and Grease Rotary vacuum pump oil High-vacuum grease Krytox PTFE grease Conductive silver grease Conductive carbon grease   Vacuum Sealant Hysol vacuum sealant Mixing cups   Diaphragm Pump Diaphragm Pump   Rotary vacuum Pump VRI-Series Rotary pump KF/NW oil mist filters Anti-vibration pads   Vacuum Sample Storage EM-Storr vacuum storage Vacu-Storr containers Micro-Tec PC Desiccators Vacuum chambers   Vacuum Pick-Up Pens Mini vacuum Pick-Up Pens Heavy duty vacuum pick-Up Battery operated vacuum pick-up Rechargeable vacuum pick-up TEM grid handling needles Sample Coating Supplies   Sputter Targets 19mm Gatan sputter targets 24mm cryo-SEM Prep targets 28mm Cressington targets 50mm sputter targets 54mm Leica/Baltec targets 57mm Cressington/JEOL targets 57mm Quorum/AGAR targets 58mm Emscope SC500 targets 60mm Denton/Edwards targets 60mm Emitech substrate targets 82mm annular substrate targets 3inch annular substrate targets   Carbon Rods & Fibers Carbon rods Ø 3.05mm Carbon rods Ø 6.15mm Carbon threads Ø 2.4mm Carbon threads Ø 1.35mm Carbon threads Ø 0.8mm   Quartz QCM Crystals 6MHz 14mm gold 6MHz 14mm silver 5MHz 12.5mm gold 5MHz 12.5mm silver   SEM Sample Coating Fluid Conductive SEM coating fluid Evaporation Supplies   Thermal Evaporation Sources Alumina coated baskets Chromium plated tungsten rod sources Folded evaporation boats Micro-Electronic evaporation sources Point loop evaporation sources Tungsten basket crucible heaters Tungsten evaporation baskets Tungsten evaporation filaments Evaporation crucibles Tungsten heater filaments Heat shielded crucible heaters Tungsten rod evaporation sources Evaporation boat sources Alumina coated Evap. Boats Special tantalum Evap. Boats Folded baffled box sources   Evaporation Materials Evaporation wires   Supports & Substrates Overview Supports/substates Vitreous carbon discs Graphite discs Graphite plates Pure metal discs HOPG substrates Silicon wafers & chips Quartz substrates Silicon finder grid Mica discs and sheets Gold coated slides Gold coated Si wafers Gold coated Si chips Silver coated slides Silver coated coverslips Silver coated Si wafers Platinum coated substrates Aluminium coated substrates Palladium coated substrates Iridium coated substrates TiN coated substrates Diamond scribers Diamond tip glass cutter Wafer cleaving pliers Precise glass & wafer cutting SEM marker pen   SEM Preparation Stands Pin stub preparation pods SEM prep. stands JEOL stub prep. stands Hitachi stub prep. stands   Tweezers Overview Tweezers Ultra-precision biology tweezers High precision tweezers High prec. reverse tweezers High prec. mini Tweezers High prec. slim tweezers High prec. titanium tweezers HP super alloy tweezers Diamond coated tweezers Cutting tweezers EM-Tec Electronic tweezers SEM stub gripper tweezers EM-Tec Cryo grid box tweezers AFM/SPM cantilever tweezers AFM/SPM disc tweezers Gatan 3View pin tweezers EM-Tec Wafer handling Tweezers EM-Tec plastic tweezers EM-Tec ESD-safe plastic tip tweezers ESD-safe ceramic tip tweezers EM-Tec Ceramic tip tweezers Value-Tec fine tweezers Value-Tec titanium tweezers Value-Tec sorting tweezers Value-Tec ceramic tip tweezers Value-Tec plastic tip tweezers Value-Tec fibre grip tweezers Value-Tec plastic tweezers Value-Tec brass tweezers Value-Tec strong tweezers Tweezers stand Tweezers clamping ring Tweezers guards   Probes & Picks Overview picks and probes EM-Tec eyelash manipulators Fine needle probes & holders Ultra-fine tungsten probes Mini needle probes Reinforced plastic probes Value-Tec stainless probes EM-Tec Nichrome loops Diamond scribers SEM marker pen   Applicators & Swabs Swabs Wooden picks Applicators ESD Safe sticky Foam tipped swabs   Plastic Transfer Pipettes Plastic transfer pipettes   Cutting Tools / Scissors Overview cutting tools/scissors Rapid-core punches + eject Heavy duty punches Heavy duty punch pliers Disposable scalpels Scalpel blades & handles Single edge blades Razor blades EM-Tec lab scissors EM-Tec Iris scissors EM-Tec micro scissors Precise glass & wafer cutting   Conductive Paint/Cement Overview adhesives Carbon paints/cements Water-based carbon paints High temp. carbon paste Silver cement Silver paint Water-based silver paint Nickel paint/cement Silver filled epoxies Silver micro-tip pen   Conductive Tapes & Tabs Overview Adhesives Carbon tabs & tapes Super smooth carbon tapes & pads EM-Tec Easy-Tabs Copper SEM tape, single sided Copper SEM tape, double sided Aluminium SEM tape   Non-Conductive Adhesives Overview Adhesives Kapton polyimide tape Double sided polyimide tape Low static polyimide tape Green PET tape Blue PVC protection tape High temperature tape Non-conductive tabs Hysol Epoxy resins TempStick mounting wax Sticky Wax 70C Dual Action glue pens Coat-Quick TEM grid pen UV curing sample glue   Sample Storage Overview storage Pin stub storage boxes Pin stub storage tubes Hitachi M4 storage boxes JEOL stub storage boxes EM-Storr vacuum storage Vacu-Storr containers EM-Tec Save-Storr Micro-Tec PC Desiccators Desiccant box Barrier foil ziplock bags Wafer carrier trays Plastic storage boxes Membrane Boxes Sticky Gel Carrier Boxes Small Cardboard Boxes Magn. AFM disc Boxes Dust Cover   Hand Tools Overview small hand tools Precise glass & wafer cutting Wafer cleaving pliers Anti-static instrument Vacuum pick-up tools Microscopy hand tools Allen Keys & Hex Drivers Precision pin vises Precision screwdriver set Hand dusters/blowers Electric engraver tools Diamond scribers Diamond tip glass cutter Glass cutter with disc SEM Marker pen Heavy duty punches Heavy duty punch pliers Tablet press Tablet punch die kit Universal bench vise Sample leveling press   Sorting Wire Mesh St. St. Woven Wire Mesh Nylon Woven Wire Mesh   Preparation Surfaces Overview prep. surfaces/stands Polyethylene prep. board granite tiles PVC prep. mats Stainless steel mesh Nylon Woven Mesh Plastic Transfer Pipettes   Cleaning / Gloves Overview cleaning & gloves Pikal superior metal polish Pikal care metal polish Pikal liquid metal polish Wenol metal polish Glass & Bell Jar polish Diamond polishing paste Optical lens cleaning tissue Cotton swabs Sticky cleaning swabs Foam tipped swabs Clean-room & lab wipes Kimwipes cleaning wipes Microfiber wipes Nitrile gloves Nylon gloves PU coated nylon gloves Cryo Protection Gloves Applicator sticks Hand dusters/blowers   Conductive Metal Powders Conductive Metal Powders   Metallographic Sample Prep Overview metallographic supplies Diamond polishing paste Sample embedding clips Silicone embedding cups Conductive metal powders Conductive embedding Black metal slides Microscope calibration PTFE beakers Micro-Tec PC desiccators Precision diamond saw Electric engraving tools Degassing/Vacuum chamber TempStick mounting wax Sample leveling press   AFM/SPM Discs Magnetic st. steel discs Gold coated discs   AFM/SPM Disc Pick-up Tool AFM/SPM disc pick-up tool   AFM/SPM Holders 90 degree holder Mini vise   AFM/SPM Disc Storage Magnetic AFM disc boxes   Cantilever Tweezers AFM/SPM cantilever tweezers   AFM/SPM Discs Tweezers Disc gripper tweezers   Nano-Tec Mica Discs 10, 12, 15 & 20mm diameter   HOPG Substrates HOPG substrates Light Microscopy   Correlative Cover Slips Correlative cover slips   Glass Microscope Slides Glass microscope slides 75x50mm large slides Concavity glass slides   Glass Cover Slips Glass cover slips   Quartz Microscope Slides Quartz microscope slides   Quartz Cover Slips Quartz cover slips   Black Metal Slides Black metal slides   Slide Storage Boxes Single slide mailers Slide mailers Boxes for 25 slides Box for 100 slides Box for large 2x3inch slides   LM Calibration Micro-Tec individual graticules MTC-5 multiple targets Stage micrometers Glass calibration slides   Plastic Transfer Pipettes Plastic transfer pipettes   Optical Lens Tissue Optical lens cleaning tissue   Glass Petri Dishes Glass petri dishes   Digital Microscope Digital Microscope 402 Digital Microscope 330   PTFE Beakers PTFE Beakers © Micro to Nano 2026 Website: www.microtonano.com Micro to Nano BV Tappersweg 91 2031 ET Haarlem Netherlands Contact - English, German and Dutch spoken Tel:+31 (0)85 2013155 Info: info@microtonano.com Administration: accounting@microtonano.com KvK-nr: 90172744 Btw-nr (Tax ID): NL865230900B01 Bankaccount: 0495516724 IBAN: NL32ABNA0495516724 BIC (SWIFT): ABNANL2AMEL