EM-Tec Low Profile S-Clip SEM sample holders


Introduction

The EM-Tec Low Profile S-Clip SEM sample holders have been developed to allow for very short working distance and high tilt of thin samples. The Low-Profile S-Clip holders can be used to clamp thin samples, such as Silicon chips, up to 1mm thickness.  The EM-Tec Low Profile S-Clips are positioned in the narrow precision slots which are cut in the specimen mounts; the clips can be moved sideways for optimum positioning.  The EM-Tec Low Profile S-Clips are less 0.3mm thick which enables bringing the sample within 1mm of the polepiece. The EM-Tec Low Profile S-Clips are made from non-magnetic phosphor bronze and can be easily modified to accommodate your samples. The currently available EM-Tec Low Profile S-Clip SEM sample holders are:

  • EM-Tec LPS12 with one short Low Profile S-Clip on a Ø12.7mm standard pin stub
  • EM-Tec LPS19 with two short Low Profile S-Clips on a Ø19 mm pin stub
  • EM-Tec LPS25 with two standard Low Profile S-Clips on a Ø25.4mm pin stub

The EM-Tec Low Profile S-Clip SEM sample holders are compatible with SEM, FESEM, SEM/FIB, Dualbeam and Crossbeam systems from Tescan, Thermo, FEI, Philips and Zeiss. For JEOL and Hitachi systems pin stub adapters should be used.



Ordering information EM-Tec Low Profile S-Clip SEM sample holders and clips

*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
  
EM-Tec  LPS12 Low Profile S-Clip SEM sample holder, single short clip on a Ø12.7mm standard pin stub EM-Tec LPS12 Low Profile S-Clip SEM sample holder, single short clip on a Ø12.7mm standard pin stub
Product # Unit Price* Add to Quote / Order
12-002912-1 each €25,50
Qty:

 

EM-Tec  LPS19 Low Profile S-Clip SEM sample holder, two short clips  on a Ø19mm pin stub EM-Tec LPS19 Low Profile S-Clip SEM sample holder, two short clips on a Ø19mm pin stub
Product # Unit Price* Add to Quote / Order
12-002919-2 each €27,50
Qty:

 

EM-Tec  LPS25 Low Profile S-Clip SEM sample holder, two standard clips  on a Ø25.4mm pin stub EM-Tec LPS25 Low Profile S-Clip SEM sample holder, two standard clips on a Ø25.4mm pin stub
Product # Unit Price* Add to Quote / Order
12-002924-2 each €29,50
Qty:

 

EM-Tec LPC5  short Low Profile S-Clips, L = 5mm, phosphor bronze EM-Tec LPC5 short Low Profile S-Clips, L = 5mm, phosphor bronze
Product # Unit Price* Add to Quote / Order
12-000150 set/5 €25,00
Qty:

 

EM-Tec LPC10  standard Low Profile S-Clips, L = 10mm, phosphor bronze EM-Tec LPC10 standard Low Profile S-Clips, L = 10mm, phosphor bronze
Product # Unit Price* Add to Quote / Order
12-000152 set/5 €25,00
Qty:

 



SEM Supplies

TEM Supplies

Calibration

Sample Preparation

AFM / SPM

  Product Menu with Images
  SEM Sample Stubs
  Carbon Tabs
  Sample Stub Adapters
  SEM Stage Adapters
  SEM Sample Holders
  SEM Preparation Stands
  Filaments / Cathodes
  Silicon Finder Grid
  Gatan 3View Pins
  FEI Volumescope Pins
  SEM Stub Storage Boxes
  Phenom Supplies
  JEOL NeoScope Supplies
  Hitachi TM Series Supplies
  Field & Lab Sampler Kits

Instruments

  Acoustic Enclosures
  Cressington SEM Coaters
  TEM Sample Prep
  TEM Grids
  TEM Support Films
  Silicon Nitride Films
  K-Kit Wet Cell Holder
  Graphene Films
  TEM Grid Boxes
  TEM Sample Staining
  3mm Embedding Tubes
  Filaments/Cathodes
  Eyelash Manipulators

Cryo Supplies

  Cryo Grid Boxes
  Other Cryo Supplies

FIB Supplies

  FIB Lift-out Grids
  FIB Low Profile Stubs
  FIB Grid Holders
  FIB Pre-tilt Holders
  FIB Grid Boxes
  SEM / FIB Magn. Calib.
  SEM Res. Test Spec.
  EDS / WDS Calibration
  TEM Calibration
  AFM / SPM Calibration
  LM Magn. Calibration

Vacuum Supplies

  Bullseye Vacuum Gauges
  Quick-check Gauges
  KF/NW Vacuum Parts
  KF/NW Hose Hoses
  Vacuum Oil and Grease
  Vacuum Sealant
  Vacuum Sample Storage

Sample Coating Supplies

  Sputter Targets
  Carbon Rods & Fibers
  Quartz QCM Crystals
  SEM Sample Coating Fluid

Evaporation Supplies

  Thermal Evaporation Sources
  Evaporation Materials
  Supports & Substrates
  SEM Preparation Stands
  Tweezers
  Probes & Picks
  Applicators & Swabs
  Plastic Transfer Pipettes
  Cutting Tools / Scissors
  Conductive Paint/Cement
  Conductive Tapes & Tabs
  Non-Conductive Adhesives
  Sample Storage
  Hand Tools
  St. St. Woven Wire Mesh
  Preparation Surfaces
  Cleaning / Gloves
  Replication Sheets
  Conductive Metal Powders
  Metallographic Sample Prep
  AFM/SPM Discs
  AFM/SPM Disc Pick-up Tool
  AFM/SPM Holders
  AFM/SPM Disc Storage
  Cantilever Tweezers
  AFM/SPM Discs Tweezers
  Nano-Tec Mica Discs
  HOPG Substrates

Light Microscopy

  Correlative Cover Slips
  Glass Microscope Slides
  Glass Cover Slips
  Quartz Microscope Slides
  Quartz Cover Slips
  Black Metal Slides
  Slide Storage Boxes
  LM Calibration
  Plastic Transfer Pipettes
  Optical Lens Tissue
  Glass Petri Dishes