Micro-Tec Polycarbonate Vacuum Desiccators
EM-Tec Save-Storr inert gas storage container
EM-Storr vacuum sample storage containers
Micro-Tec Polycarbonate Vacuum Desiccators
clear, shatterproof, lightweight desiccators with vacuum gauge
1 Integrated vacuum gauge
2 Venting valve
3 Soft neoprene o-ring seal
4 Pumping valve
5 Sample storage plate
6 Space for desiccant
13-004250 Micro-Tec PD250 polycarbonate desiccator, Ø 250mm
The Micro-Tec lightweight, polycarbonate desiccators are ideally suited to store samples in a clean and moisture free environment. The shatterproof polycarbonate desiccators are much lighter and safer than glass desiccators.
They include an integrated vacuum gauge in the lid and venting/pumping valves both in the base and in the lid. The venting valve allows for gentle venting to avoid disturbance of the stored samples. Beneath the white polypropylene storage plate there is ample space for a desiccant to keep a moisture free environment. The base of de Micro-Tec desiccators includes a large diameter rim for added stability. The soft neoprene O-ring provides a vacuum seal which does not require grease. The Micro-Tec polycarbonate vacuum desiccators can hold a vacuum level of 150 mbar for over 3 weeks. The lid includes a large, ribbed knob for easy lifting and handling. The Micro-Tec polycarbonate desiccators are available in two sizes: 150mm and 250mm diameter.
These Polycarbonate desiccators are also ideal for degassing of epoxies or resins; the two valves allow for precise adjusting of the vacuum level. Both the pumping speed and the venting speed can be controlled separately.
Features of the Micro-Tec lightweight polycarbonate desiccators
- Made from clear, shatterproof polycarbonate
- Integrated vacuum gauge in lid
- 2 venting/pumping valves with hose connectors
- Polypropylene sample storage plate
- Desiccant chamber underneath the storage plate
- Soft neoprene O-ring seal
- Large, ribbed knob on lid
- Easy sample location through clear wall and lid
Specifications of the Micro-Tec Polycarbonate desiccators:
Product |
Micro-Tec PD150 |
Micro-Tec PD250 |
Micro-Tec PD252 |
Product # |
13-004150 |
13-004250 |
13-004252 |
Inside Diameter |
150 mm |
250 mm |
250 mm |
Outside Diameter |
180 mm |
280 mm |
280 mm |
Inside storage height |
100 mm |
90 mm |
70 mm |
Inside lid height |
50 mm |
90 mm |
90 mm |
Inside total height |
150 mm |
180 mm |
160 mm |
Total height outside |
290 mm |
360 mm |
340 mm |
Volume |
2.2 ltr |
6.5 ltr |
7.5 ltr |
Weight |
0.8 kg |
1.75 kg |
1.35 kg |
Hose connection on valves (2x) |
Ø8 mm |
||
Integrated vacuum gauge |
0 to -1kg/cm2 (0 to -14.2psi) |
||
Service temperature |
5 - 40 °C |
||
Technical Support Bulletin: Micro-Tec polycarbonate vacuum desiccators
Ordering information for Micro-Tec lightweight polycarbonate desiccators
|
|
|
|
|
|
|
|||||||||||||||
= Hazard Shipping Fee
|
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
