EM-Tec low profile metallographic mount holders
Multiple metallographic mount holders
EM-Tec bulk specimen holders
EM-Tec metallographic mount holders
EM-Tec low profile metallographic mount holders
Introduction
The EM-Tec low profile metallographic mount holders are designed to hold metallographic, petrographic and ceramographic mounts or embeddings. These low profile holders are equally useful holding round samples with size similar to the mounts or for holding short cylindrical specimen stubs. The height of the inside of the holder is 4mm and there are two slots for easy removal of the sample. Available for all standard metallurgical mounts from 25 to 50mm diameter (1” to 2”). The samples are secured with an M3 set screw; an allen key is included with the holder. They are all made from vacuum grade aluminium with an AISI 304 stainless steel screw. Non-magnetic brass screws can be found here: https://www.microtonano.com/Replacement-parts-screws-spring-clips-O-rings-for-EM-Tec-sample-holders-stage-adapter-stainless-steel-brass-copper.php#a12009231B
Available with:
- Standard pin to fit on SEM which use the standard pin; TFS, FEI, Philips, Tescan, Phenom, Pemtron, Aspex, RJLee, AmRay, Cambridge Instruments, Leica and CamScan SEMs.
- M4 threaded hole compatible with Hitachi SEMs, FESEMs and table top SEMs and with the EM-Tec versatile SEM stage adapters
Product # |
Type |
Mount sizes |
Dimensions w/o pin |
Mount holding |
SEM stage comp. |
EM-Tec LPM25 |
Ø25 mm / Ø1” |
Ø32 x 8.5mm |
M3 set screw |
Standard 3.2mm pin |
|
EM-Tec LPM25 |
Ø25 mm / Ø1” |
Ø32 x 8.5 mm |
M3 set screw |
M4 thread |
|
EM-Tec LPM30 |
Ø30 mm / Ø32 mm / Ø1-1/4” |
Ø38 x 8.5 mm |
M3 set screw |
Standard 3.2mm pin |
|
EM-Tec LPM30 |
Ø30 mm / Ø32 mm / Ø1-1/4” |
Ø38 x 8.5 mm |
M3 set screw |
M4 thread |
|
EM-Tec LPM40 |
Ø40 mm / Ø1-1/2” |
Ø46 x 8.5 mm |
M3 set screw |
Standard 3.2mm pin |
|
EM-Tec LPM40 |
Ø40 mm / Ø1-1/2” |
Ø46 x 8.5 mm |
M3 set screw |
M4 thread |
|
EM-Tec LPM50 |
Ø50 mm / Ø2” |
Ø59 x 8.5 mm |
M3 set screw |
Standard 3.2mm pin |
|
EM-Tec LPM50 |
Ø5 0mm / Ø2” |
Ø59 x 8.5 mm |
M3 set screw |
M4 thread |
Ordering Information for EM-Tec low profile metallographic mount holders for SEMs using pin stubs; TFS, FEI, Philips, Zeiss, LEO Tescan, AmRay, Pemtron, Coxem, Aspex, RJLee, Cambridge Instruments, Leica, and CamScan
|
|
|
|
|
|
|
|
