EM-Tec CV1 large centering vise SEM sample holders
EM-Tec versatile vise clamps
EM-Tec geological slide holders
EM-Tec SEM stage adapters
EM-Tec CV1 large centering vise SEM sample holders
1- EM-Tec CV1 centering vise SEM sample holder for up to 110mm closed
2- EM-Tec CV1 centering vise SEM sample holder for up to 110mm open
3- EM-Tec CV1 centering vise SEM sample holder extended size closed
4- EM-Tec CV1 centering vise SEM sample holder extended size open
Introduction
The EM-Tec CV1 large centering vise SEM sample holder comprises a unique advantage. It keeps the sample always clamped in the centre of the holder. Both vise clamp jaws simultaneously move away or to the centre of the holder at the same time.
The EM-Tec CV1 large centering vise clamp includes two base plates on which the vise jaws can be re-positioned for optimum sample compatibility. The brass dual vise spindle is located underneath the baseplates with knurled knobs at both sides. The spindle can be operated from either side. One side includes a removable spindle extension to provide better grip when opening the centering vise. Made from vacuum grade aluminium and brass to provide dry lubrication. The vise jaws are mounted on the base with brass mounting screws.
Features of the EM-Tec CV1 large centering vise SEM sample holder are:
- provides firm grip for large and heavy samples
- automatically holds the sample in the centre of the SEM stage
- easier navigation from the centre of the SEM
- re-positionable vise jaws on the base plate for optimum sample compatibility
- standard stage clamps from 0 to 110mm
- spindle extension can be removed to reduce overall size
- optional extension base plates allows clamping from 0 to 155mm
- standard vise jaws with triple grooved side and smooth side
- optional vise jaw with single 120° groove for round samples
The EM-Tec CV1 entering vise is a heavy duty sample holder intended for use on SEMs with large chambers and stages with a stage travel distances of 80mm or more. With a spindle travel of 42mm and re-positionable vise jaws the standard clamping ranges are 0-42mm, 34-78mm and 68-110mm. With the optional extension plate the additional clamping range are 102-144mm and 113-155mm
| Base plate size | 40x40mm (2x) |
| Vise jaw VC3 size | 12x40x6mm (2x) |
| Spindle travel | 42mm |
| Standard interspacing | 17mm |
| Standard clamping capacity | 0-110mm |
| Overall size closed | 106x40x34mm |
| Overall size open | 122x40x34mm |
| Extension plate size | 22.5x40mm (2x) |
| Extended interspacing | 11mm |
| Extended clamping capacity | 0-155mm |
| Overall extended size closed | 146x40x34mm |
| Overall extended size open | 167x40x34mm |
Technical Support Bulletin: EM-Tec CV1 large centering vise
Ordering information EM-Tec CV1 large centering vise holder for SEMs using pin stubs; TFS, FEI, Philips, Tescan, Aspex, RJLee, AmRay, Cambridge Instruments, Leica and CamScan SEMs
|
|
|
|
|
|
