EM-Tec S-Clip SEM sample holders
Introduction
a few examples
The EM-Tec S-Clip sample holders all comprise one or more spring-loaded sample clips (S-Clips) either on an SEM sample stub or a SEM sample holder. The spring-loaded S-clips are specifically designed to hold thin specimens up to 2mm on a holder. Optional stand-off pillars are available to accommodate thicker samples. Small washers can also be used to increase the clamping height.
The S-clip are mounted with a small M2 screw which allows the S-clip to rotate. The S-Clips are made from conductive spring grade copper alloy; samples are clamped securely without the need for conductive adhesives or conductive pastes. Sample changing is quick, easy and clean; contamination issues due to adhesives or glues are eliminated. They are ideal to hold Si chips and other thin samples.
The EM-Tec S-Clip SEM sample holders are available for the following SEM platforms:
- Standard pin stubs for TFS, FEI, Philips, Tescan, Phenom, Aspex, RJLee, Pemtron, Coxem, Cambridge, CamScan, Leica etc
- Zeiss pin stubs (shorter pin) for Zeiss & LEO SEMs
- JEOL plain cylinder sample stubs
- Hitachi M4 cylinder sample stubs
The EM-Tec S-Clip sample holders are available to hold samples horizontal (flat), at 45° or at 90°. The 45° and 90° are useful for holding cross sections of thin samples and wafer pieces. EM-Tec S-Clip sample holders are a cost effective alternative for the 1”-3” wafer holders. They can hold the smaller 1”(25.4mm), 2” (51mm) and 3”(76mm) wafers if it is allowed to hold the wafer down with the S-Clips:
- EM-Tec S-Clip holders with 38m stub diameter is suitable for: 1” (25.4mm) wafers
- EM-Tec S-Clip holders with 63m stub diameter is suitable for: 2” (51mm) wafers
- EM-Tec S-Clip holders with 100mm stub diameter is suitable for: 3” (76mm) wafers
The EM-Tec S-Clips are also separately available to enable customers to make their own custom made sample clip holders. Dimensions are 12.8mm long, tip is 1.6mm wide, height is 1.5mm with a Ø2.2mm hole for mounting with an M2 screw. Made from 0.25mm thin spring grade copper alloy. Include with the EM-Tec S-clips are the M2x3 mounting screws.
Sample thickness is 0-2mm for the standard EM-Tec S-Clip. With stand-off pillars thicker samples can be accommodated. Stand-off pillars are 4mm high; they can be mounted between the S-Clap and the holder; they are stackable.
Ordering information for EM-Tec S-Clip sample holders, flat, standard pin stubs compatible with SEMS: TFS, FEI, Philips, Tescan, Phenom XL, Aspex, RJLee, AmRay, Cambridge Instruments, Leica and CamScan SEMs.
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000900 |
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
|
pkg/5 |
€27,50
|
|
|
|
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000904 |
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
|
set/6 |
€7,50
|
|
|
|
EM-Tec S-Clip sample holder with 1x S-Clip on 19mm pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002910 |
EM-Tec S-Clip sample holder with 1x S-Clip on 19mm pin stub |
|
each |
€15,00
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø25.4mm pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002920-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø25.4mm pin stub |
|
each |
€18,50
|
12-002920-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø25.4mm pin stub |
|
each |
€24,00
|
12-002920-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø25.4mm pin stub |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø32mm standard pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002930-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø32mm pin stub |
|
each |
€18,50
|
12-002930-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø32mm pin stub |
|
each |
€24,00
|
12-002930-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø32mm pin stub |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø38mm standard pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002940-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø38mm pin stub |
|
each |
€19,50
|
12-002940-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø38mm pin stub |
|
each |
€25,50
|
12-002940-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø38mm pin stub |
|
each |
€30,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø50mm standard pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002950-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø50mm pin stub |
|
each |
€21,00
|
12-002950-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø50mm pin stub |
|
each |
€26,50
|
12-002950-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø50mm pin stub |
|
each |
€31,50
|
12-002950-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø50mm pin stub |
|
each |
€36,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø63mm standard pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002960-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø63mm pin stub |
|
each |
€31,50
|
12-002960-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø63mm pin stub |
|
each |
€36,50
|
12-002960-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø63mm pin stub |
|
each |
€43,50
|
12-002960-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø63mm pin stub |
|
each |
€48,50
|
12-002960-8 |
EM-Tec S-Clip sample holder with 8x S-Clips on Ø63mm pin stub |
|
each |
€59,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø100mm standard pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002990-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø100mm pin stub |
|
each |
€76,50
|
12-002990-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø100mm pin stub |
|
each |
€81,50
|
12-002990-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø100mm pin stub |
|
each |
€86,50
|
12-002990-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø100mm pin stub |
|
each |
€89,50
|
12-002990-8 |
EM-Tec S-Clip sample holder with 8x S-Clips on Ø100mm pin stub |
|
each |
€99,50
|
|
|
Ordering Information for EM-Tec S-Clip sample holders, 45° and 90°, standard pin stubs
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
EM-Tec S-Clip sample holder with 1xS-Clip 45° on Ø25.4mm pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002925 |
each |
€19,95
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips 45°/90° on Ø25.4mm pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002927 |
each |
€25,00
|
|
|
|
|
EM-Tec PS15C Pin stub swivel mount sample holder with 1xS-Clip, pin |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002901 |
each |
€48,50
|
|
|
|
|
EM-Tec TV12C mini variable 0-90° angle tilt sample holder with 1 x S-Clip, angle indicators at 0, 30, 45, 70 and 90°, pin |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002941 |
each |
€69,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips double 90° on Ø25.4mm pin |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002929 |
each |
€26,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 1xS-Clip at 90°, Ø12.7mm, pin |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002911 |
each |
€25,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 4xS-Clips at 45° and 4xS-Clip at 90°, 50x10x14mm, pin |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002908 |
each |
€99,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 4xS-Clips at 90°, 12.7x12.7x14mm, pin |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002914 |
each |
€39,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 10xS-Clips at 90°, 50x10x14mm, pin |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-002919 |
each |
€99,50
|
|
|
|
EM-Tec S-Clip SEM sample holders for Zeiss SEMs using shorter pin stubs
Ordering Information for EM-Tec S-Clip sample holders, flat, Zeiss pin stubs
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000900 |
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
|
pkg/5 |
€27,50
|
|
|
|
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000904 |
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
|
set/6 |
€7,50
|
|
|
|
EM-Tec S-Clip sample holder with 1x S-Clip on Ø19mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003910-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø19mm Zeiss pin stub |
|
each |
€15,00
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø25.4mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003920-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø25.4mm Zeiss pin stub |
|
each |
€18,50
|
12-003920-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø25.4mm Zeiss pin stub |
|
each |
€24,00
|
12-003920-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø25.4mm Zeiss pin stub |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø32mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003930-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø32mm Zeiss pin stub |
|
each |
€18,50
|
12-003930-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø32mm Zeiss pin stub |
|
each |
€24,00
|
12-003930-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø32mm Zeiss pin stub |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø38mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003940-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø38mm Zeiss pin stub |
|
each |
€19,50
|
12-003940-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø38mm Zeiss pin stub |
|
each |
€25,50
|
12-003940-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø38mm Zeiss pin stub |
|
each |
€31,00
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø50mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003950-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø50mm Zeiss pin stub |
|
each |
€21,00
|
12-003950-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø50mm Zeiss pin stub |
|
each |
€26,50
|
12-003950-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø50mm Zeiss pin stub |
|
each |
€31,50
|
12-003950-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø50mm Zeiss pin stub |
|
each |
€36,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø63mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003960-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø63mm Zeiss pin stub |
|
each |
€31,50
|
12-003960-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø63mm Zeiss pin stub |
|
each |
€36,50
|
12-003960-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø63mm Zeiss pin stub |
|
each |
€43,50
|
12-003960-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø63mm Zeiss pin stub |
|
each |
€48,50
|
12-003960-8 |
EM-Tec S-Clip sample holder with 8x S-Clips on Ø63mm Zeiss pin stub |
|
each |
€59,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø100mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003990-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø100mm Zeiss pin stub |
|
each |
€76,50
|
12-003990-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø100mm Zeiss pin stub |
|
each |
€81,50
|
12-003990-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø100mm Zeiss pin stub |
|
each |
€86,50
|
12-003990-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø100mm Zeiss pin stub |
|
each |
€89,50
|
12-003990-8 |
EM-Tec S-Clip sample holder with 8x S-Clips on Ø100mm Zeiss pin stub |
|
each |
€99,50
|
|
|
Ordering Information for EM-Tec S-Clip sample holders, 45° and 90°, Zeiss pin stubs
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
EM-Tec S-Clip sample holder with 1xS-Clip 45° on Ø25.4mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003925 |
each |
€19,95
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips 45°/90° on Ø25.4mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003927 |
each |
€25,00
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips double 90° on Ø25.4mm Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003929 |
each |
€26,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 4xS-Clips at 90°, 12.7x12.7x14mm, Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003914 |
each |
€39,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 4xS-Clips at 45° and 4xS-Clips at 90°, 50x10x14mm, Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003908 |
each |
€99,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 10xS-Clips at 90°, 50x10x14mm, Zeiss pin stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-003919 |
each |
€99,50
|
|
|
|
EM-Tec S-Clip SEM sample holders for Hitachi SEMs
Ordering Information for EM-Tec S-Clip sample holders, flat, M4 threaded hole
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000900 |
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
|
pkg/5 |
€27,50
|
|
|
|
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000904 |
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
|
set/6 |
€7,50
|
|
|
|
EM-Tec S-Clip sample holder with 1x S-Clip on Ø15x10mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004910-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø15x10mm stub, M4 |
|
each |
€15,00
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø25x10mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004920-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø25x10mm stub, M4 |
|
each |
€18,50
|
12-004920-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø25x10mm stub, M4 |
|
each |
€24,00
|
12-004920-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø25x10mm stub, M4 |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø32x10mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004930-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø32x10mm stub, M4 |
|
each |
€18,50
|
12-004930-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø32x10mm stub, M4 |
|
each |
€24,00
|
12-004930-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø32x10mm stub, M4 |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø50x6mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004950-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø50x6mm stub, M4 |
|
each |
€21,00
|
12-004950-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø50x6mm stub, M4 |
|
each |
€26,50
|
12-004950-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø50x6mm stub, M4 |
|
each |
€31,50
|
12-004950-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø50x6mm stub, M4 |
|
each |
€36,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø63x6mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004960-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø63x6mm stub, M4 |
|
each |
€31,50
|
12-004960-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø63x6mm stub, M4 |
|
each |
€36,50
|
12-004960-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø63x6mm stub, M4 |
|
each |
€43,50
|
12-004960-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø63x6mm stub, M4 |
|
each |
€48,50
|
12-004960-8 |
EM-Tec S-Clip sample holder with 8x S-Clips on Ø63x6mm stub, M4 |
|
each |
€59,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø100x4.5mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004990-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø100x4.5mm stub, M4 |
|
each |
€76,50
|
12-004990-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø100x4.5mm stub, M4 |
|
each |
€81,50
|
12-004990-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø100x4.5mm stub, M4 |
|
each |
€86,50
|
12-004990-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø100x4.5mm stub, M4 |
|
each |
€89,50
|
12-004990-8 |
EM-Tec S-Clip sample holder with 8x S-Clips on Ø100x4.5mm stub, M4 |
|
each |
€99,50
|
|
|
Ordering Information for EM-Tec S-Clip sample holders, 45° and 90°, M4 threaded hole
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
EM-Tec HS15C S-Clip swivel mount sample holder with 1xS-Clip, Ø15mm, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004911 |
each |
€54,50
|
|
|
|
|
EM-Tec TV12C mini variable 0-90° angle tilt sample holder with 1 x S-Clip, angle indicators at 0, 30, 45, 70 and 90°, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004947 |
each |
€67,00
|
|
|
|
|
EM-Tec S-Clip sample holder with 1xS-Clip 45° on Ø25mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004925 |
each |
€19,95
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips 45°/90° on Ø25 stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004927 |
each |
€25,00
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips double 90° on Ø25mm stub, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004929 |
each |
€26,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 4xS-Clips at 90°, 12.7x12.7x14mm, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004914 |
each |
€39,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 4xS-Clips at 45° and 4xS-Clips at 90°, 50x10x14mm, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004908 |
each |
€99,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 10xS-Clips at 90°, 50x10x14mm, M4 |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-004919 |
each |
€99,50
|
|
|
|
EM-Tec S-Clip SEM sample holders for JEOL SEMs compatible using JEOL stubs
Ordering Information for EM-Tec S-Clip sample holders, flat, JEOL stubs
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000900 |
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws |
|
pkg/5 |
€27,50
|
|
|
|
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-000904 |
6 each EM-Tec S-Clip stand-off pillars, 4mm height, brass, M2x3 male/female |
|
set/6 |
€7,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø25x10mm JEOL SEM stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-005920-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø25x10mm JEOL SEM stub |
|
each |
€18,50
|
12-005920-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø25x10mm JEOL SEM stub |
|
each |
€24,00
|
12-005920-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø25x10mm JEOL SEM stub |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø32x10mm JEOL SEM stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-005930-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø32x10mm JEOL SEM stub |
|
each |
€18,50
|
12-005930-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø32x10mm JEOL SEM stub |
|
each |
€24,00
|
12-005930-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø32x10mm JEOL SEM stub |
|
each |
€29,50
|
|
|
|
EM-Tec S-Clip sample holder with S-Clip(s) on Ø50x5mm JEOL SEM stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-005950-1 |
EM-Tec S-Clip sample holder with 1x S-Clip on Ø50x5mm JEOL SEM stub |
|
each |
€21,00
|
12-005950-2 |
EM-Tec S-Clip sample holder with 2x S-Clips on Ø50x5mm JEOL SEM stub |
|
each |
€26,50
|
12-005950-3 |
EM-Tec S-Clip sample holder with 3x S-Clips on Ø50x5mm JEOL SEM stub |
|
each |
€31,50
|
12-005950-4 |
EM-Tec S-Clip sample holder with 4x S-Clips on Ø50x5mm JEOL SEM stub |
|
each |
€36,50
|
|
|
Ordering Information for EM-Tec S-Clip sample holders, 45° and 90°, JEOL stubs
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
|
EM-Tec JS15C S-Clip swivel mount sample holder with 1xS-Clip, JEOL Ø12.2mm |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-005911 |
each |
€54,50
|
|
|
|
|
EM-Tec S-Clip sample holder with 1xS-Clip 45° on Ø25mm JEOL SEM stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-005925 |
each |
€19,95
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips 45°/90° on Ø25 JEOL SEM stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-005927 |
each |
€25,00
|
|
|
|
|
EM-Tec S-Clip sample holder with 2xS-Clips double 90° on Ø25mm JEOL SEM stub |
Product # |
Unit |
Price* |
Add to Quote / Order |
12-005929 |
each |
€26,50
|
|
|
|