Micro-Tec Tablet Press and Tablet Punch Die Kit


Introduction

Determining the chemical composition of a fine powder with SEM/EDS can be sometimes difficult. Pressing the fine powder into a tablet (if needed with a bonding compound) simplifies handling. By providing a flat surface, the overall analytical results can be improved. It also reduces possible contamination of the SEM with fine powder. If needed the tablet can be coated with a carbon film to provide conductivity.  Tablet presses are also used for XRF applications. There are two tablet presses with different designs available:

  •  Micro-Tec MTB manual tablet press for Ø3, 6, 8, 10 and 12mm tablets. Manual press with integrated tablet mould, punch and die. The tablet mould, punch and die are not separately available; only as a complete tablet press. Overall size is 185 x 120 x 210mm with a handle length of 195mm. Leverage of the handle is approx. 4-5 x. Weight is 4.6kg; made from carbon steel.
  • Micro-Tec TPD tablet punch die kit for Ø6, 9 and 12mm tablets. A hammer or separate press is needed to form the tablets. Consists of 4 pieces. Overall dimensions are Ø43 x 175mm. Weight is 0.9Kg; made from carbon steel. The tablet punch die kit is of a different design and is not interchangeable with the Micro-Tec MTB manual tablet press.

Technical support bulletin: Assembling and use of Micro-Tec tablet press and tablet punch die kits.



Ordering information for Micro-Tec Tablet Press and Tablet Punch Die Kit

*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
  
Micro-Tec MTB3 tablet press for Ø3mm tablets, carbon steel Micro-Tec MTB3 tablet press for Ø3mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007203 each €418,50
Qty:

 

Micro-Tec MTB6 manual tablet press for Ø6mm tablets, carbon steel Micro-Tec MTB6 manual tablet press for Ø6mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007206 each €418,50
Qty:

 

Micro-Tec MTB8 tablet press for Ø8mm tablets, carbon steel Micro-Tec MTB8 tablet press for Ø8mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007208 each €408,50
Qty:

 

Micro-Tec MTB10 manual tablet press for Ø10mm tablets, carbon steel Micro-Tec MTB10 manual tablet press for Ø10mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007210 each €388,50
Qty:

 

Micro-Tec MTB12 manual tablet press for Ø12mm tablets, carbon steel Micro-Tec MTB12 manual tablet press for Ø12mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007212 each €388,50
Qty:

 

Ordering information for Micro-Tec TPD tablet punch die kits

*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
  
Micro-Tec TPD6 Tablet Punch Die kit for Ø6mm tablets, carbon steel Micro-Tec TPD6 Tablet Punch Die kit for Ø6mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007306 Kit €112,50
Qty:

 

Micro-Tec TPD9 Tablet Punch Die kit for Ø9mm tablets, carbon steel Micro-Tec TPD9 Tablet Punch Die kit for Ø9mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007309 Kit €112,50
Qty:

 

Micro-Tec TPD12 Tablet Punch Die kit for Ø12mm tablets, carbon steel Micro-Tec TPD12 Tablet Punch Die kit for Ø12mm tablets, carbon steel
Product # Unit Price* Add to Quote / Order
52-007312 Kit €112,50
Qty:

 



SEM Supplies

TEM Supplies

Calibration

Sample Preparation

AFM / SPM

  Product Menu with Images
  SEM Sample Stubs
  Carbon Tabs
  Sample Stub Adapters
  SEM Stage Adapters
  SEM Sample Holders
  SEM Preparation Stands
  Filaments / Cathodes
  Silicon Finder Grid
  Gatan 3View Pins
  FEI Volumescope Pins
  SEM Stub Storage Boxes
  Phenom Supplies
  JEOL NeoScope Supplies
  Hitachi TM Series Supplies
  Field & Lab Sampler Kits
  FlowView liquid sample Kit

Instruments

  Acoustic Enclosures
  Cressington SEM coaters
  TEM Sample Prep
  Diaphragm Pump
  Rotary vacuum Pump
  Precision diamond saw  
  TEM Grids
  TEM Support Films
  Silicon Nitride Films
  K-Kit Wet Cell Holder
  Graphene Films
  TEM Grid Boxes
  Cryo Grid Boxes
  TEM Sample Staining
  3mm Embedding Tubes
  Filaments/Cathodes
  Eyelash Manipulators

Cryo Supplies

  Cryo Grid Boxes
  Other Cryo Supplies

FIB Supplies

  FIB Lift-out Grids
  FIB Low Profile Stubs
  FIB Grid Holders
  FIB Pre-tilt Holders
  FIB Pre-tilt stubs
  FIB Grid Boxes
  SEM / FIB Magn. Calib.
  SEM Res. Test Spec.
  EDS / WDS Calibration
  TEM Calibration
  AFM / SPM Calibration
  LM Magn. Calibration

Vacuum Supplies

  Vacuum Gauges
  KF/NW Vacuum Parts
  KF/NW Vacuum Hoses
  ISO Vacuum flange parts
  Vacuum Oil and Grease
  Vacuum Sealant
  Diaphragm Pump
  Rotary vacuum Pump
  Vacuum Sample Storage
  Vacuum Pick-Up Pens

Sample Coating Supplies

  Sputter Targets
  Carbon Rods & Fibers
  Quartz QCM Crystals
  SEM Sample Coating Fluid

Evaporation Supplies

  Thermal Evaporation Sources
  Evaporation Materials
  Supports & Substrates
  SEM Preparation Stands
  Tweezers
  Probes & Picks
  Applicators & Swabs
  Plastic Transfer Pipettes
  Cutting Tools / Scissors
  Conductive Paint/Cement
  Conductive Tapes & Tabs
  Non-Conductive Adhesives
  Sample Storage
  Hand Tools
  Sorting Wire Mesh
  Preparation Surfaces
  Cleaning / Gloves
  Conductive Metal Powders
  Metallographic Sample Prep
  AFM/SPM Discs
  AFM/SPM Disc Pick-up Tool
  AFM/SPM Holders
  AFM/SPM Disc Storage
  Cantilever Tweezers
  AFM/SPM Discs Tweezers
  Nano-Tec Mica Discs
  HOPG Substrates

Light Microscopy

  Correlative Cover Slips
  Glass Microscope Slides
  Glass Cover Slips
  Quartz Microscope Slides
  Quartz Cover Slips
  Black Metal Slides
  Slide Storage Boxes
  LM Calibration
  Plastic Transfer Pipettes
  Optical Lens Tissue
  Glass Petri Dishes
  Digital Microscope
  PTFE Beakers