EM-Tec metallographic mount holders
EM-Tec SEM stage adapters
EM-Tec bulk specimen holders
Universal clamping holder
EM-Tec metallographic mount holders
Introduction
EM-Tec metallographic mount holder
for Ø30mm / Ø1-1/4inch mounts, pin
The EM-Tec metallographic mount holders are designed to hold metallographic, petrographic and ceramographic mounts or embeddings. These practical and sturdy holders are equally useful holding round samples with size similar to the mounts or for holding larger cylindrical specimen stubs. Available for all standard metallurgical mounts from 25 to 50mm diameter (1” to 2”). The samples are secured with an M3 set screw; an allen key is included with the holder. Additional longer screws are supplied to hold smaller samples as well. They are all made from vacuum grade aluminium and have undergone a final cleaning step which results in a satin surface finish. Available with:
- standard pin to fit on SEM which use the standard pin; FEI, Philips, Tescan, Phenom, Pemtron, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, ETEC and Novascan SEMs.
- M4 threaded hole compatible with Hitachi SEMs, FESEMs and table top SEMs and with the EM-Tec versatile SEM stage adapters
- Ø14mm JEOL stub compatible with JEOL and EM-Tec stage adapters with a Ø14mm connection
Product # |
Type |
Mount sizes |
Dimensions w/o pin |
Mount holding |
SEM stage comp. |
EM-Tec M26 |
Ø25mm / Ø1” |
Ø34x12.5mm |
Set screw |
Standard 3.2mm pin |
|
EM-Tec M26 |
Ø25mm / Ø1” |
Ø34x12.5mm |
Set screw |
M4 thread |
|
EM-Tec M26 |
Ø25mm / Ø1” |
Ø34x12.5mm |
Set screw |
Ø14mm JEOL stub |
|
EM-Tec M32 |
Ø30mm / Ø32mm / Ø1-1/4” |
Ø40x12.5mm |
Set screw |
Standard 3.2mm pin |
|
EM-Tec M32 |
Ø30mm / Ø32mm / Ø1-1/4” |
Ø40x12.5mm |
Set screw |
M4 thread |
|
EM-Tec M32 |
Ø30mm / Ø32mm / Ø1-1/4” |
Ø40x12.5mm |
Set screw |
Ø14mm JEOL stub |
|
EM-Tec M40 |
Ø40mm / Ø1-1/2” |
Ø48x12.5mm |
Set screw |
Standard 3.2mm pin |
|
EM-Tec M40 |
Ø40mm / Ø1-1/2” |
Ø48x12.5mm |
Set screw |
M4 thread |
|
EM-Tec M40 |
Ø40mm / Ø1-1/2” |
Ø48x12.5mm |
Set screw |
Ø14mm JEOL stub |
|
EM-Tec M51 |
Ø50mm / Ø2” |
Ø59x12.5mm |
Set screw |
Standard 3.2mm pin |
|
EM-Tec M51 |
Ø50mm / Ø2” |
Ø59x12.5mm |
Set screw |
M4 thread |
|
EM-Tec M51 |
Ø50mm / Ø2” |
Ø59x12.5mm |
Set screw |
Ø14mm JEOL stub |
Ordering Information for EM-Tec metallographic mount holders for SEMs using pin stubs; TFS, FEI, Philips, Zeiss, LEO Tescan, AmRay, Pemtron, Coxem, Aspex, RJLee, Cambridge Instruments, Leica, and CamScan
|
|
|
|
|
|
|
|
|
|
|
|
