EM-Tec SEM stub based compact sample holders


Introduction
                                     a few  Examples
EM-Tec SEM stub based compact sample holders 12-000117 EM-Tec GR2 needle12-000117 tube sample holder for up to2mm gold plated brass EM-Tec HS16 M4 cylinder stub round clamp up to Ø16mm,  Ø25x10mm, M4 12-000270-M2N-EM-Tec F12 compact FIB grid holder for up to 2 FIB grids  pin 12-000503-EM-Tec JS3 mini cylinder stub SampleClamp-JEOL-12-x10mm #10-002211 EM-Tec PS11 mini pin stub grid holder for 1 x TEM grid, Ø12.7x3.2mm, pin 10-002238-EM-Tec P38 fixed 36-pre-tilt holder for FEI FIB systems 12-000345 EM-Tec H45P fixed 45  pre-tilt holder for pin stubs holders M4 10-002218 EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7x7.2mm, pin 10-002214EM-Tec-PS-4-min- pin-stub-grid-holder-for-4 xTEM grids-12x3mm-pin 12-000356-MtoN-EM-Tec multi stub holder for 3 x15mm Hitachi stubs-50x6mm-M4 10-002240-MtoN-EM-Tec PS4 mini pin stub vise clamp 0-4mm-12.7x7 EM-Tec PS5 pin stub round clamp up to Ø3.5mm,  Ø12.7x7.2mm, pin

The EM-Tec stub based SEM sample holders are all small SEM sample holders based on (modified) SEM sample stubs. They have the same footprint as the original SEM sample stubs and are directly compatible with the SEM stage or SEM sample stub holder.  These affordable sample holders increase efficiency and reduce sample preparation time. Using sample holders reduces the use of conductive adhesives which can be a source of contamination. The EM-Tec stub based small sample holders formats are:

The pin stub based sample holders comprise the largest selection; they can be easily used on other SEM platforms by using the cost efficient EM-Tec SEM stub adapters. All EM-Tec compact SEM stub based SEM sample holders are precision machined from vacuum grade aluminium unless otherwise noted. Provided with set screws and allen keys.


EM-Tec pin stub based compact sample holders

There is a wide choice of the compact EM-Tec pin stub based sample holders. Since they are small and using the standard pin stub format, they will fit in virtually any SEM compatible with standard pin stubs. They are based on standard pin stubs or made from modified pin stubs with a pin size of Ø3.15mm and a pin length of 9.5mm. Ideal for table top SEMs such as the Phenom but just as useful on laboratory grade SEMs and FESEMs. Using a sample holders is quicker, cleaner and provides more stability than conductive tapes or glues.
Capacity, stub size and sample holding method of the EM-Tec pin stub based compact sample holders

Product #

Style

Capacity

Size w/o pin

Sample holding method

12-000117

EM-Tec PS2

0 – Ø2mm

Ø6x4mm

Set screw

10-002212

EM-Tec PS3

2mm thickness

Ø12.7x3.2mm

Screw/washer

10-002240

EM-Tec PS4

0 – 4mm

Ø12.7x7.2mm

Set screw

10-002244

EM-Tec PS44

4 x 0-4mm

Ø25.4x7.2mm

4 x Set Screw

10-002223

EM-Tec PS23

2x2.5mm

Ø25x7.2mm

Set screw

10-002227

EM-Tec PS27

2x7mm thickness

Ø25x7.2mm

Set screw

10-002218

EM-Tec PS6

0 – 6mm

Ø12.7x7.2mm

Mini vise jaws

12-000230

EM-Tec PS9

0 – 8mm

Ø15x10mm

Mini vise jaws

10-002242

EM-Tec PS7

2 x 1mm

Ø15x10mm

Set screw

12-000112

EM-Tec PS12

0 – 12mm

Ø25x7.2mm

Set Screw

10-002213

EM-Tec PS5

0 – Ø3.5mm

Ø12.7x7.2mm

Set Screw

10-002216

EM-Tec PS8

0 – Ø6mm

Ø12.7x7.2mm

Set Screw

12-000116

EM-Tec PS16

0 – Ø16mm

Ø25x7.2mm

Set Screw

10-002211

EM-Tec PS11

1 x 3.05mm Grid

Ø12.7x3.2mm

Gravity

10-002214

EM-Tec PS14

4 x 30.5mm Grid

Ø12.7x3.2mm

Gravity

11-000210

EM-Tec PE10

Ø3.2mm pin

Ø12.7x13.2mm

Set screw

12-000211

EM-Tec PS15

Ø15mm

Ø15x15mm

Adhesive

12-000270

EM-Tec F12

2 x FIB grid

Ø12.7x8mm

Vise jaws

10-002236

EM-Tec P36

Ø3.2mm pin

Ø12.7x17mm

Set screw

10-002238

EM-Tec P38

Ø3.2mm pin

Ø12.7x17mm

Set screw

10-002245

EM-Tec P45

Ø3.2mm pin

Ø12.7x17mm

Set screw

10-002246

EM-Tec P45M

M4

Ø12.7x17mm

M4 thread

10-002270

EM-Tec P70

Ø3.2mm pin

Ø12.7x20mm

Set screw

10-002274

EM-Tec P70M

M4

Ø12.7x20mm

M4 thread

 

EM-Tec cylinder stub based compact sample holders for JEOL SEMs

The compact EM-Tec cylinder stub based sample holders for JEOL SEMs are made from either the Ø12.2x10 or Ø25x10mm JEOL cylinder stubs. They are directly compatible with the JEOL stub holders on the SEM stage. Perfect for the JEOL Neoscope 5000/6000 table top SEMs, but equally useful on laboratory grade SEMs and FESEMs.
Capacity, stub size and sample holding methode of the EM-Tec JEOL stub based compact sample holders

Product #

Style

Capacity

Stub size

Sample holding method

12-000502

EM-Tec JS2

0 – Ø2mm

Ø12.2x10mm

Set screw

12-000503

EM-Tec JS3

2mm thickness

Ø12.2x10mm

Screw/washer

12-000504

EM-Tec JS4

0 – 4mm

Ø12.2x10mm

Set screw

12-000512

EM-Tec JS12

0 – 12mm

Ø25x10mm

Set screw

12-000514

EM-Tec JS14

0 – Ø16mm

Ø25x10mm

Set screw



EM-Tec M4 stub based compact sample holders for Hitachi SEMs

The compact EM-Tec cylinder stub based for Hitachi SEMs are based on either the Ø15mm or the Ø25mm Hitachi M4 sample stubs. They can be used directly on the Hitachi SEM stage adapters and the EM-Tec SEM stage adapters with M4 thread. They are perfect for the Hitachi TM1000, TM3000, TM3030 table top SEMs, but will be very useful on all other Hitachi SEMs as well.
Capacity, stub size and sample holding methode of the EM-Tec Hitachi M4 stub based compact sample holders

Product #

Style

Capacity

Stub size

Sample holding method

12-000331

EM-Tec HS2

0 – Ø2mm

Ø15x10mm x M4

Set screw

12-000311

EM-Tec HS3

2mm thickness

Ø15x10mm x M4

Screw/washer

12-000306

EM-Tec HS6

0 – 6mm

Ø15x10mm x M4

Set screw

12-000330

EM-Tec HS9

0 – 8mm

Ø15x10mm x M4

Mini vise jaws

12-000315

EM-Tec HS15

0- 16mm

Ø25x10mm x M4

Set screw

12-000328

EM-Tec HS7

2 x 1mm

Ø15x6mm x M4

Set screw

12-000307

EM-Tec HS10

0 – Ø10mm

Ø15x10mm x M4

Set screw

12-000304

EM-Tec HS12

0 – Ø12,2mm

Ø15x10mm x M4

Set screw

12-000324

EM-Tec HS16

0 – Ø16mm

Ø25x10mm x M4

Set screw

12-000356

EM-Tec H3

3 x Ø15mm

Ø25x6mm x M4

3 x M4

11-000309

EM-Tec HE-10

10mm H

Ø15x10mm x M4

M4

12-000345

H45P

Ø3.2mm pin

Ø12.7x17mm x M4

Set screw

12-000341

H45

M4

Ø12.7x17mm x M4

M4

12-000370

H70P

Ø3.2mm pin

Ø12.7x20mm x M4

Set screw

12-000371

H70

M4

Ø12.7x20mm x M4

M4



Ordering Information for EM-Tec pin stub based compact sample holders for SEMs using pin stubs: TFS, FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica and CamScan SEMs

*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
  
EM-Tec PS4 mini pin stub vise clamp 0-4mm, Ø12.7x7.2mm, pin
EM-Tec PS4 mini pin stub vise clamp 0-4mm, Ø12.7x7.2mm, pin EM-Tec PS4 mini pin stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross sections of thin samples. Holder size w/o pin is Ø12.7x7.2mm.
Product # Unit Price* Add to Quote / Order
10-002240 each €7,50
Qty:

10-002240-10 pkg/10 €71,25
Qty:



EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7x7.2mm, pin
EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7x7.2mm, pin EM-Tec PS6 mini pin stub split vise clamp for sample thickness from 0-6mm. The sample is clamped between the two min vise clamps. The split vise jaws are closed by an allen screw. Closed split vise diameter is 12.7mm; when opened it is 19x12.7mm.
Product # Unit Price* Add to Quote / Order
10-002218 each €24,50
Qty:



EM-Tec PS44 quad vise stub holder for 4 samples from 0-4mm, pin
EM-Tec PS44 quad vise stub holder for 4 samples from 0-4mm, pin The samples are held vertically with 4 small set screws. Most effective way to study cross sections or thin samples. Holder size w/o pin is Ø25.4 x 7.2mm. Standard pin.
Product # Unit Price* Add to Quote / Order
10-002244 each €29,50
Qty:



EM-Tec PS7 mini pin stub dual slot vise clamp, 2x1mm, Ø15x6mm, pin
EM-Tec PS7 mini pin stub dual slot vise clamp, 2x1mm, Ø15x6mm, pin EM-Tec PS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø15x6mm.
Product # Unit Price* Add to Quote / Order
10-002242 each €19,50
Qty:



EM-Tec PS12 pin stub vise clamp 0-12mm, Ø25x7.2mm, pin
EM-Tec PS12 pin stub vise clamp 0-12mm, Ø25x7.2mm, pin EM-Tec PS12 pin stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw. Most effective way to study cross section of thin samples. Holder size w/o pin is Ø25x6mm.
Product # Unit Price* Add to Quote / Order
12-000112 each €24,50
Qty:



EM-Tec PS5 pin stub round clamp up to Ø3.5mm, Ø12.7x7.2mm, pin
EM-Tec PS5 pin stub round clamp up to Ø3.5mm,  Ø12.7x7.2mm, pin EM-Tec PS5 mini pin stub to clamp round shaped samples up to Ø3.5mm. Samples are held by a set screw. Pin stub top diameter is 12.7mm.
Product # Unit Price* Add to Quote / Order
10-002213 each €18,50
Qty:



EM-Tec PS8 pin stub round clamp up to Ø6mm, Ø12.7x7.2mm, pin
EM-Tec PS8 pin stub round clamp up to Ø6mm,  Ø12.7x7.2mm, pin EM-Tec PS8 mini pin stub to clamp round shaped samples up to Ø6.0mm. Samples are held by a set screw. Pin stub top diameter is 12.7mm.
Product # Unit Price* Add to Quote / Order
10-002216 each €18,50
Qty:



EM-Tec PS15 Pin stub swivel mount, Ø15x15mm, pin
EM-Tec PS15 Pin stub swivel mount, Ø15x15mm, pin EM-Tec PS15 swivel pin stub mount. The head of the mount is attached to the pin via a swivel hinge which allows for 90 degrees tilting each way. Excellent mount for SEMs without tilting facilities or when random tilt angled are needed. When the desired tilt angle is set, the top is secured with a socket cap screw. Top diameter is 15mm and height above pin is 15mm.
Product # Unit Price* Add to Quote / Order
12-000211 each €38,50
Qty:



EM-Tec PS16 pin stub round clamp up to Ø16mm, Ø25x7.2mm, pin
EM-Tec PS16 pin stub round clamp up to Ø16mm,  Ø25x7.2mm, pin EM-Tec PS16 pin stub to clamp round shaped samples up to Ø16.0mm. Samples are held by a set screw. Pin stub top diameter is 25mm.
Product # Unit Price* Add to Quote / Order
12-000116 each €24,50
Qty:



EM-Tec P36 fixed 36°pre-tilt holder for Zeiss FIB systems, Ø12.7x17mm, pin
EM-Tec P36 fixed 36°pre-tilt holder for Zeiss FIB systems, Ø12.7x17mm, pin EM-Tec P36 fixed angle 36° tilt holder for Zeiss pin stubs. Used to pre-tilt samples 36° for Zeiss CrossBeam FIB systems. Size without pin is Ø 12.7 x 17 mm.
Product # Unit Price* Add to Quote / Order
10-002236 each €39,50
Qty:



EM-Tec P38 fixed 38°pre-tilt holder for TFS / FEI FIB systems, Ø12.7x17mm, pin
EM-Tec P38 fixed 38°pre-tilt holder for TFS / FEI FIB systems, Ø12.7x17mm, pin EM-Tec P38 fixed 38° tilt holder for TFS / FEI pin stubs. Used to pre-tilt samples 38° for TFS / FEI Dual Beam FIB systems. Size without pin is Ø 12.7 x 17 mm.
Product # Unit Price* Add to Quote / Order
10-002238 each €39,50
Qty:



EM-Tec GR2 needle / tube sample holder for up to Ø2mm, gold plated brass, pin
EM-Tec GR2 needle / tube sample holder for up to Ø2mm, gold plated brass, pin EM-Tec PS2 mini pin stub tube/needle clamp. Capacity is up to Ø2mm diameter, the needle is secured with a small set screw. This holder is ideal for probes, needles, wire and thin tubes. Holder size is Ø6x4mm. Made from brass and plated with 1µm of pure gold.
Product # Unit Price* Add to Quote / Order
12-000117 each €22,50
Qty:



EM-Tec P45 fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, pin
EM-Tec P45 fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, pin EM-Tec P45 fixed 45° tilt holder for standard pin stubs. Image sample surfaces or cross sections directly under 45°. Particularly useful for table top SEMs without tilt facilities. Size w.o. pin is Ø12.7x17mm.
Product # Unit Price* Add to Quote / Order
10-002245 each €39,50
Qty:



EM-Tec P45M fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, pin
EM-Tec P45M fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, pin EM-Tec P45M fixed 45° tilt holder for Hitachi M4 cylinder stubs. Enables imaging sample surfaces or cross sections directly under 45° w/o having to tilt the SEM stage. Very useful for tabletop SEMs without tilt facility. Dimensions without pin are Ø 12,7 x 17 mm.
Product # Unit Price* Add to Quote / Order
10-002246 each €39,50
Qty:



EM-Tec PH10 pin stub extender, 10mm extra height, Ø12.7x22.7mm, aluminium
EM-Tec PH10 pin stub extender, 10mm extra height,  Ø12.7x22.7mm, aluminium EM-Tec PH10 pin stub extender, 10mm extra height, Ø12.7x22.7mm, aluminium. Use when extra height is needed to bring the sample closer to the pole piece of the SEM, without using the Z-axis of the stage. Includes Allen key.
Product # Unit Price* Add to Quote / Order
11-000210 each €24,50
Qty:



EM-Tec P70 EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, pin
EM-Tec P70 EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, pin EM-Tec P70 fixed 70° EBSD tilt holder for pin stubs and pin stub type sample holders. Tilts the sample surface directly at the correct angle (70°) for EBSD analysis applications. Suitable for surfaces and cross sections. Size without pin is 12.7 x 12.7 x 20mm.
Product # Unit Price* Add to Quote / Order
10-002270 each €44,50
Qty:



EM-Tec F12 compact FIB grid holder for up to 2 FIB grids, pin
EM-Tec F12 compact FIB grid holder for up to 2 FIB grids, pin EM-Tec F12 is a basic yet practical FIB grid holder with pin for 2 FIB grids. Based on the standard Ø12.7mm pin stub it is compact and useful for storing valuable FIB samples. The 10mm wide vise clamp includes a ledge for easy positioning of the FIB grids
Product # Unit Price* Add to Quote / Order
12-000270 each €29,50
Qty:



EM-Tec P70M EBSD 70° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x20mm, pin
EM-Tec P70M EBSD 70° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x20mm, pin EM-Tec P70M fixed 70° EBSD tilt holder for Hitachi M4 stubs and sample holders with M4 threaded hole. Tilts the sample surface directly at the correct angle (70°) for EBSD analysis applications. Size without pin is 12.7 x 12.7 x 20 mm.
Product # Unit Price* Add to Quote / Order
10-002274 each €44,50
Qty:



EM-Tec PS11 mini pin stub grid holder for 1 x TEM grid, Ø12.7x3.2mm, pin
EM-Tec PS11 mini pin stub grid holder for 1 x TEM grid, Ø12.7x3.2mm, pin EM-Tec PS11 mini pin stub holder for a single TEM or FIB grid. TEM grid rim rests on a ledge; in the middle of the cavity there is dimple; samples on the grid are free standing and not touched by the holder. Groove is provided for easy loading/unloading of the TEM grid with fine tweezers. The TEM grid is not clamped. This holder is used for quickly checking a TEM grid in the SEM or as a grid holder for a carbon evaporator. Pin stub top diameter is 12.7mm.
Product # Unit Price* Add to Quote / Order
10-002211 each €19,50
Qty:



EM-Tec PS14 mini pin stub grid holder for 4 x TEM grids, Ø12.7x3.2mm, pin
EM-Tec PS14 mini pin stub grid holder for  4 x TEM grids, Ø12.7x3.2mm, pin EM-Tec PS14 mini pin stub holder for four TEM or FIB grids. TEM grid rim rests on a ledge; in the middle of each cavity there is dimple to provide a non-touching area for the mesh of the grid. Grooves are provided for easy loading/unloading of the TEM grids with fine tweezers. The TEM grids are not clamped. This holder is used for quickly checking TEM grids in the SEM or as a grid holder for a carbon evaporator. Pin stub top diameter is 12.7mm.
Product # Unit Price* Add to Quote / Order
10-002214 each €24,50
Qty:



EM-Tec PS3 mini pin stub SampleClamp 0-2mm, Ø12.7mm, pin
EM-Tec PS3 mini pin stub SampleClamp  0-2mm, Ø12.7mm, pin EM-Tec PS3 mini pin stub SampleClamp to clamp thin samples, foils, Si wafer pieces, etc. directly on the small stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Pin stub diameter is 12.7mm.
Product # Unit Price* Add to Quote / Order
10-002212 each €18,50
Qty:



EM-Tec PS9 mini split mount vise 0 - 8mm, pin
EM-Tec PS9 mini split mount vise 0 - 8mm, pin EM-Tec PS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions without pin are Ø15x10mm; when opened 23x15x10mm.
Product # Unit Price* Add to Quote / Order
12-000230 each €26,50
Qty:



EM-Tec PS23 pin stub dual slot vise clamp, 2x2.5mm on Ø25x7.2mm pin stub
EM-Tec PS23 pin stub dual slot vise clamp, 2x2.5mm on Ø25x7.2mm pin stub EM-Tec PS23 pin stub dual slot vise with two slots of 2.5 mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø25x7.2mm.
Product # Unit Price* Add to Quote / Order
10-002223 each €24,50
Qty:



EM-Tec PS27 pin stub dual slot vise clamp, 2x7mm on Ø25x7.2mm pin stub
EM-Tec PS27 pin stub dual slot vise clamp, 2x7mm on Ø25x7.2mm pin stub EM-Tec PS27 pin stub dual slot vise with two slots of 7 mm wide. Ideal for holding thin wafer pieces samples for cross section imaging or other thin samples. Samples are clamped by set screws. Holder size w/o pin is Ø25x7.2mm.
Product # Unit Price* Add to Quote / Order
10-002227 each €24,50
Qty:



Ordering Information for EM-Tec Hitachi M4 stub based compact sample holders for Hitachi SEMs and the versatile EM-Tec SEM stage adapters

*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
  
EM-Tec HS2 mini M4 cylinder stub tube/needle clamp Ø2mm , Ø15x10mm, M4
EM-Tec HS2 mini M4 cylinder stub tube/needle clamp Ø2mm , Ø15x10mm, M4 EM-Tec HS2 mini M4 cylinder tub/needle clamp. Capacity is Ø2mm maximum, the needle is secured with a small set screw. This holder is ideal for probes, needles, wire and thin tubes. The perfect holder for the Cameca Atom Probe Microscope needle shaped samples. Holder size is Ø15x10mmxM4.
Product # Unit Price* Add to Quote / Order
12-000331 each €18,50
Qty:



EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, Ø15x10mm, M4
EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, Ø15x10mm, M4 EM-Tec HS6 mini M4 cylinder stub vise clamp for sample thickness from 0-6mm. The sample is held vertically with a small set screw. Simple and cost-effective way to clamp cross sections of thin samples. Holder stub size is Ø15x10mmxM4.
Product # Unit Price* Add to Quote / Order
12-000306 each €18,50
Qty:



EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, Ø25x10mm, M4
EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, Ø25x10mm, M4 EM-Tec HS15 M4 cylinder stub vise clamp for sample thickness from 0-16mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp base on the stub size of Ø25x10mmxM4.
Product # Unit Price* Add to Quote / Order
12-000315 each €24,50
Qty:



EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, Ø15x6mm, M4
EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, Ø15x6mm, M4 EM-Tec HS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer like samples for cross section imaging. Sample are clamped by set screws. Holder size is Ø15x6mm, M4 threaded hole.
Product # Unit Price* Add to Quote / Order
12-000328 each €19,50
Qty:



EM-Tec HS10 M4 cylinder stub round clamp up to Ø10mm, Ø15x10mm, M4
EM-Tec HS10 M4 cylinder stub round clamp up to Ø10mm,  Ø15x10mm, M4
Product # Unit Price* Add to Quote / Order
12-000307 each €24,50
Qty:



EM-Tec HS12 M4 cylinder stub round clamp up to Ø12.2mm, Ø15x10mm, M4
EM-Tec HS12 M4 cylinder stub round clamp up to Ø12.2mm,  Ø15x10mm, M4
Product # Unit Price* Add to Quote / Order
12-000304 each €24,50
Qty:



EM-Tec HS16 M4 cylinder stub round clamp up to Ø16mm, Ø25x10mm, M4
EM-Tec HS16 M4 cylinder stub round clamp up to Ø16mm,  Ø25x10mm, M4 EM-Tec HS16 M4 cylinder stub to clamp round shaped samples up to Ø16mm in diameter. Samples are held by a set screw in the middle of a 25mm Hitachi stub. Holder stub size is Ø25x10mmxM4.
Product # Unit Price* Add to Quote / Order
12-000324 each €24,50
Qty:



EM-Tec H3 multi stub holder for 3 x Ø15mm Hitachi stubs, Ø25x6mm, M4
EM-Tec H3 multi stub holder for 3 x Ø15mm Hitachi stubs, Ø25x6mm, M4 EM-Tec H3 multi stub adapter for 3 x Ø15mm Hitachi stubs. Compact and simple multi stub adapter based on the Hitachi Ø25x6mmxM4 stub.
Product # Unit Price* Add to Quote / Order
12-000356 each €28,50
Qty:



EM-Tec H45P fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, M4
EM-Tec H45P fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, M4 EM-Tec H45P fixed 45° tilt holder for standard and Zeiss pin stubs. Image sample surfaces or cross sections directly under 45° w/o having to use the tilt on the SEM stage. Particularly useful for table top SEMs without tilt facilities or to extend tilt angles for limited tilt stages. Overall size is Ø12.7x17mmxM4.
Product # Unit Price* Add to Quote / Order
12-000345 each €39,50
Qty:



EM-Tec H45 fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, M4
EM-Tec H45 fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, M4 EM-Tec H45 fixed 45° tilt holder Hitachi M4 cylinder stubs. Image sample surfaces or cross sections directly under 45° w/o having to tilt the SEM stage. Particularly useful for table top SEMs without tilt facilities or to extend tilt angles for limited tilt stages. Overall size is Ø12.7x17mmxM4.
Product # Unit Price* Add to Quote / Order
12-000341 each €39,50
Qty:



EM-Tec H70P EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, M4
EM-Tec H70P EBSD 70° / 20° pre-tilt holder for pin stubs/holders, 12.5x12.5x20mm, M4 EM-Tec H70P fixed 70° EBSD tilt holder for pin stubs and pin stub type sample holders. Tilts the sample surface directly at the correct angle (70°) for EBSD analysis applications. Suitable for surfaces and cross sections. Overall size is 12.7 x 12.7 x 20 mm x M4.
Product # Unit Price* Add to Quote / Order
12-000370 each €44,50
Qty:



EM-Tec H10 Hitachi M4 stub extender 10mm fixed, Ø15x10mm, M4
EM-Tec H10 Hitachi M4 stub extender 10mm fixed, Ø15x10mm, M4 EM-tec H10 Hitachi M4 stub extender with a fixed height of 10mm. Use where extra height is needed to get closer to the pole piece of the SEM or to change height quickly without using the Z-axis of the SEM stage when multi pin holders are used. Machined from vacuum grade aluminium with stainless steel screw. Overall size is Ø15x14mm.
Product # Unit Price* Add to Quote / Order
11-000309 each €19,50
Qty:



EM-Tec H70 EBSD 70° / 20° pre-tilt holder for Hitachi M4 stubs/holders, 12.5x12.5x20mm, M4
EM-Tec H70 EBSD 70° / 20° pre-tilt holder for Hitachi M4 stubs/holders, 12.5x12.5x20mm, M4 EM-Tec H70 fixed 70° EBSD tilt holder for Hitachi M4 stubs and sample holders with M4 threaded hole. Tilts the sample surface directly at the correct angle (70°) for EBSD analysis applications. Overall size is 12.7 x 12.7 x 20 mm x M4.
Product # Unit Price* Add to Quote / Order
12-000371 each €44,50
Qty:



EM-Tec HS3 mini M4 cylinder stub SampleClamp 0-2mm , Ø15x10mm, M4
EM-Tec HS3  mini M4 cylinder stub SampleClamp 0-2mm , Ø15x10mm, M4 EM-Tec HS3 mini M4 cylinder stub SampleClamp to clamp thin samples, foils, Si wafer pieces etc. directly on the stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Holder stub size is Ø15x10mmxM4.
Product # Unit Price* Add to Quote / Order
12-000311 each €18,50
Qty:



EM-Tec HS9 mini split mount vise 0 - 8mm, M4
EM-Tec HS9 mini split mount vise 0 - 8mm, M4 EM-Tec HS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two Allen screws. Closed mini split mount vise dimensions are Ø15x10mm; when opened 24x15x10mm. M4 threaded hole in the base.
Product # Unit Price* Add to Quote / Order
12-000330 each €25,50
Qty:



Ordering information for EM-Tec JEOL stub based compact sample holders for JEOL SEMs

*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
  
EM-Tec JS2 mini cylinder stub tube/needle clamp Ø2mm, JEOL Ø12.2x10mm
EM-Tec JS2 mini cylinder stub tube/needle clamp Ø2mm, JEOL  Ø12.2x10mm
Product # Unit Price* Add to Quote / Order
12-000502 each €18,50
Qty:



EM-Tec JS4 mini cylinder stub vise clamp 0-4mm, JEOL Ø12.2x10mm
EM-Tec JS4 mini cylinder stub vise clamp 0-4mm, JEOL  Ø12.2x10mm EM-Tec JS4 mini cylinder stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross section of thin samples. Holder stub size is Ø12.2x10mm.
Product # Unit Price* Add to Quote / Order
12-000504 each €18,50
Qty:



EM-Tec JS12 cylinder stub vise clamp 0-12mm, JEOL Ø25x10mm
EM-Tec JS12 cylinder stub vise clamp 0-12mm, JEOL  Ø25x10mm EM-Tec JS12 cylinder stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp based on the stub size of Ø25x10mm.
Product # Unit Price* Add to Quote / Order
12-000512 each €24,50
Qty:



EM-Tec JS14 cylinder stub round clamp for up to Ø16mm, JEOL Ø25x10mm
EM-Tec JS14 cylinder stub round clamp for up to Ø16mm, JEOL  Ø25x10mm
Product # Unit Price* Add to Quote / Order
12-000514 each €24,50
Qty:



EM-Tec JS3 mini cylinder stub SampleClamp 0-2mm, JEOL Ø12.2x10mm
EM-Tec JS3 mini cylinder stub SampleClamp 0-2mm, JEOL  Ø12.2x10mm EM-Tec JS3 mini cylinder stub SampleClamp to clamp thin samples, foils, Si wafer pieces etc. directly on the small stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Holder stub size is Ø 12.2 x 10 mm.
Product # Unit Price* Add to Quote / Order
12-000503 each €18,50
Qty:





SEM Supplies

TEM Supplies

Calibration

Sample Preparation

AFM / SPM

  Product Menu with Images
  SEM Sample Stubs
  Carbon Tabs
  Sample Stub Adapters
  SEM Stage Adapters
  SEM Sample Holders
  SEM Preparation Stands
  Filaments / Cathodes
  Silicon Finder Grid
  Gatan 3View Pins
  FEI Volumescope Pins
  SEM Stub Storage Boxes
  Phenom Supplies
  JEOL NeoScope Supplies
  Hitachi TM Series Supplies
  Field & Lab Sampler Kits
  FlowView liquid sample Kit

Instruments

  Acoustic Enclosures
  Compact sputter coaters
  Cressington SEM coaters
  TEM Sample Prep
  Diaphragm Pump
  Rotary vacuum Pump
  Precision diamond saw  
  TEM Grids
  TEM Support Films
  Silicon Nitride Films
  K-Kit Wet Cell Holder
  Graphene Films
  TEM Grid Boxes
  Cryo Grid Boxes
  TEM Sample Staining
  3mm Embedding Tubes
  Filaments/Cathodes
  Eyelash Manipulators

Cryo Supplies

  Cryo Grid Boxes
  Other Cryo Supplies

FIB Supplies

  FIB Lift-out Grids
  FIB Low Profile Stubs
  FIB Grid Holders
  FIB Pre-tilt Holders
  FIB Pre-tilt stubs
  FIB Grid Boxes
  SEM / FIB Magn. Calib.
  SEM Res. Test Spec.
  EDS / WDS Calibration
  TEM Calibration
  AFM / SPM Calibration
  LM Magn. Calibration

Vacuum Supplies

  Vacuum Gauges
  KF/NW Vacuum Parts
  KF/NW Vacuum Hoses
  Vacuum Oil and Grease
  Vacuum Sealant
  Diaphragm Pump
  Rotary vacuum Pump
  Vacuum Sample Storage
  Vacuum Pick-Up Pens

Sample Coating Supplies

  Sputter Targets
  Carbon Rods & Fibers
  Quartz QCM Crystals
  SEM Sample Coating Fluid

Evaporation Supplies

  Thermal Evaporation Sources
  Evaporation Materials
  Supports & Substrates
  SEM Preparation Stands
  Tweezers
  Probes & Picks
  Applicators & Swabs
  Plastic Transfer Pipettes
  Cutting Tools / Scissors
  Conductive Paint/Cement
  Conductive Tapes & Tabs
  Non-Conductive Adhesives
  Sample Storage
  Hand Tools
  Sorting Wire Mesh
  Preparation Surfaces
  Cleaning / Gloves
  Conductive Metal Powders
  Metallographic Sample Prep
  AFM/SPM Discs
  AFM/SPM Disc Pick-up Tool
  AFM/SPM Holders
  AFM/SPM Disc Storage
  Cantilever Tweezers
  AFM/SPM Discs Tweezers
  Nano-Tec Mica Discs
  HOPG Substrates

Light Microscopy

  Correlative Cover Slips
  Glass Microscope Slides
  Glass Cover Slips
  Quartz Microscope Slides
  Quartz Cover Slips
  Black Metal Slides
  Slide Storage Boxes
  LM Calibration
  Plastic Transfer Pipettes
  Optical Lens Tissue
  Glass Petri Dishes
  Digital Microscope
  PTFE Beakers